Description
The Bachelor is a 220mm square outdoor LED wall light with an anthracite die-cast aluminium frame surrounding an opal white polycarbonate diffuser. A 14W integrated LED sits behind the diffuser, producing 1180 lumens at 3000K warm white across a 122° beam angle. The IP65 rating protects the internal components from dust ingress and water jets, making it suitable for exposed wall mounting on exterior facades, under eaves, beside doorways, and on covered porches.
Designed for both wall and ceiling mounting, the Bachelor provides ambient downlight or wall-wash light depending on orientation. On a wall it casts a soft glow downward and to the sides, useful for illuminating pathways, steps, or seating areas adjacent to a building. Ceiling-mounted it provides general area light for covered outdoor spaces such as pergolas, carports or canopies. The 82mm projection from the wall keeps the fitting close to the building line without protruding into circulation space.
The anthracite powder-coated finish is a charcoal grey tone that sits between black and mid-grey, pairing with both dark masonry and lighter render finishes. The aluminium frame forms a shallow box profile with visible fixing screws at each corner, reflecting the functional aesthetic common to Mantra's outdoor range. At 1.66kg the fitting has enough mass to feel solidly made without requiring structural wall reinforcement for installation on brick, block or timber-framed walls.
The integrated LED is non-replaceable and rated for approximately 25,000 hours of operation, equivalent to around nine years of use at three hours per evening. The fixture operates on 100-240V mains voltage, accommodating both UK and international supply without requiring a transformer. The LED is not dimmable.
Specification
| Colour Finish 1 |
Anthracite |
| Length |
220mm |
| Height |
220mm |
| Projection |
82mm |
| Number Of Bulbs |
1 |
| Lamp Socket |
Integrated LED |
| Colour Temperature |
3000K Warm White |
| Beam Angle |
122° |
| Lumen |
1180lm |
| Power Consumption |
14W |
| Voltage |
100-240V~50/60Hz |
| Dimmable |
No |
| IP Rating |
IP65 |
| Weight |
1.66KG |
| Warranty |
3 Year |
Frequently Asked
Can this be used in a bathroom or shower area?
The IP65 rating protects against water jets, so the Bachelor can be used outdoors in exposed locations or in covered outdoor areas. For indoor bathrooms, IP65 exceeds the IP44 minimum required for zones 1 and 2, but check local building regulations for specific zone placement requirements.
Is it suitable for ceiling mounting as well as wall mounting?
Yes. The Bachelor can be mounted on either a wall or a ceiling. On a wall it provides downward and lateral wash light; on a ceiling it acts as a flush area light for covered outdoor spaces such as porches or carports.
Can the LED be replaced when it fails?
No. The LED is integrated and non-replaceable. The unit is rated for approximately 25,000 hours of operation, which equates to around nine years of use at three hours per evening. After this period the entire fixture would need replacing.
What wall surface can it be fixed to?
The Bachelor is supplied with wall fixings suitable for brick, block or timber-framed walls. The 1.66kg weight does not require structural reinforcement on standard masonry. For lightweight cladding or render-only finishes, ensure fixings reach a solid substrate behind.