Description
A small rounded shade in smoked glass, hung from polished chrome, softens the light rather than throwing it out hard. At 20cm across it reads as a quiet point of interest above a surface rather than a centrepiece. It takes an E27 lamp and we would fit an LED here: a GLS globe for an even wash of light, or a tubular lamp if you want the filament showing through the tint. With a suitable lamp and a compatible dimmer, the level can be brought down.
On its own it suits a bedside, a hallway, or a reading corner where there is nowhere to stand a table lamp. Repeated in a row along a kitchen island or a breakfast bar it earns its keep, and because the shade is compact the fittings can sit close together without the line looking heavy. We like it in rooms with lower ceilings, where a broader shade would sit awkwardly in the eyeline. This is an earthed fitting for dry rooms indoors, run from an ordinary household circuit.
Glass and polished chrome do all the work, and the two play off each other: the metal picks up light while the tinted shade holds it back. Keep the chrome away from abrasive cleaners, and give the glass an occasional wipe with a barely damp cloth, power off and everything cold before you begin. Marks show more readily on smoked glass than on clear, so a light touch fairly often beats a hard clean now and then. It carries a one year warranty. Lamps are not included. We stock this same large shade in cognac glass, and the range steps down through smaller smoked and cognac pendants, including a bell shape, if this one is bigger than the spot needs.
Specification
| Colour |
Polished Chrome |
| Ceiling Mountable |
Yes |
| Weight |
1.10KG |
| Diameter |
200mm |
| Minimum Drop |
300mm |
| Maximum Drop |
1300mm |
| Materials Used |
Iron, Glass |
| Adjustable Height |
Yes |
| Energy Class |
A++ to D |
| Max Energy Class |
A++ |
| Min Energy Class |
D |
| Lamp |
1 x E27 40W max (lamps not included) |
| Lamp Cap |
E27 |
| Recommended Lamp |
LED (GLS A60, ST64, Tubular T45) |
| Light Distribution |
Ambient |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption |
Dependent On Lamps Used (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Dimmable |
Yes - Suitable Lamps & Dimmer Required |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Shade Colour |
Smoked |
| Shade Material |
Glass |
| Shade Included |
Yes |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Use white gloves provided when handling crystal and glass. (3) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
How far down will it hang?
The drop runs from a minimum of 300mm to a maximum of 1300mm, so it can sit close to the ceiling or low over an island.
Which lamp does it need?
One E27 lamp, up to 40W. LED is our recommendation, in GLS A60, ST64 or tubular T45 form. No lamp is supplied with the pendant.
Can it be dimmed?
Yes, provided you pair a dimmable lamp with a dimmer switch that is compatible with it.
How big is the shade, and how heavy is the fitting?
The shade is 200mm in diameter and the fitting weighs 1.1kg.
How should I clean the smoked glass?
A barely damp soft cloth, then dry off straight away. Skip solvents, cream cleaners and anything gritty, as the tint and the chrome both scratch.
Is there a smaller version?
Yes. The range includes 16cm small pendants and 14cm bell pendants, both in smoked and in cognac glass with polished chrome.