Arcs Outdoor LED Wall Light 6W 3000K - Anthracite

The Arcs is a 170mm wide outdoor LED wall light in anthracite finish, housing an integrated 6W 3000K LED that casts light both upwards and downwards through an open curved frame. The LED sits at the centre of the fitting, projecting 450lm of warm white light through top and bottom apertures to create dual beams that wash the wall above and below the mounting point.

Designed for external walls on terraces, garden rooms, building entrances and pathways, the Arcs adds architectural accent lighting to facades without flooding the area with direct glare. The IP54 rating protects the internal LED and driver from dust and water spray, allowing the fitting to be installed on exposed walls. The 40mm projection from the wall keeps the fitting low-profile, suitable for narrow walkways and areas where protruding fixtures would be a head-height hazard.

The anthracite finish is a dark grey-brown powder coat over metal, sitting between charcoal and matt black in tone. The curved frame creates shadow lines during daylight and the dual-beam effect at night turns flat walls into layered surfaces with defined bands of light above and below the fitting. The 3000K warm white colour temperature suits residential and hospitality contexts where warmer tones are preferred over cooler white exterior lighting.

At 6W power consumption and 450lm output, the Arcs provides accent lighting rather than security flood lighting. The 150° beam angle spreads light broadly across the wall surface rather than concentrating it into a narrow spot. The non-dimmable integrated LED is rated for 3 years under warranty and draws minimal energy for pathway and architectural feature lighting that runs dusk-to-dawn.

What does the IP54 rating mean for outdoor use?

IP54 means the fitting is protected against dust ingress and water spray from any direction. It can be installed on external walls exposed to rain but should not be placed where it would be subjected to direct high-pressure water jets or full submersion.

Can the light direction be adjusted?

No. The Arcs is a fixed fitting with the LED positioned to project light both upwards and downwards through the curved frame. The dual-beam effect is part of the design and cannot be redirected.

Is it suitable for covered porches or open terraces?

Both. The IP54 rating allows installation in fully exposed locations as well as covered areas. The 40mm projection makes it suitable for narrow covered walkways where deeper fittings would protrude too far.

What mounting height works best?

Typical mounting height is 1.5-2m above ground level for pathway and terrace lighting. At this height the dual beams create visible bands of light on the wall without directing glare into eye level when approaching the fitting.