Free Delivery on all orders over £99*

APUS 1.3W LED Step Light Mains Daylight - Steel

£3199
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The APUS is a recessed LED step light that sits flush in the wall, drawing 1.3W direct from a 220-240V AC mains supply. It puts out 15 lumens in a crisp 6500K daylight tone, giving a low-level glow rather than full room brightness. Wired straight to mains, it needs no separate 12V transformer, which keeps the install simple. In US terms a fitting like this is sold as a recessed step light, marking edges and low wall lines along a stairway.

The APUS suits indoor stairs, hallways and landings where a soft marker light makes steps easier to read at night without flooding the space. Its 15-lumen output is meant for orientation, not ambient lighting, so think of it as edge marking along a staircase or a gentle wash down a wall face near the floor. Mount it at the foot of a flight or along a corridor skirting line to pick out the route. It is rated IP20, so keep it to dry indoor positions and clear of bathrooms, porches or any damp setting.

Built from polished stainless steel with a plastic body, the APUS measures 75 x 23 x 75 mm and weighs 120g, with a square front plate. It recesses into the wall for a flush finish that sits neatly against the surface. The fitting is not dimmable and carries a rated life of 50,000 hours, so it should run for years with little attention. The stainless steel face wipes clean and resists everyday marks. Wider Apus options are available across the range if you need matching fittings nearby.

Specification
Power 1.3W
Voltage 220-240 AC
Luminous flux 15 lm
Efficiency 12 lm/W
Colour temperature 6500K
Colour rendering (CRI) Ra 80
IP rating IP20
Dimmable No
Mounting Recessed Mount In The Wall
Lifespan 50,000 hours
Shape Square
Dimensions 75 × 23 × 75 mm
Weight 120 g
Material Polished Stainless Steel, Plastic
Finish Stainless Steel
Frequently Asked

Does this step light need a separate 12V transformer?

No. The APUS runs on 220-240V AC mains, so it wires straight in with no external 12V transformer or driver required. This makes it simpler to fit into an existing lighting circuit.

Can it be used outdoors or in a bathroom?

No. It is rated IP20, which means dry indoor use only. Keep it clear of bathrooms, porches, gardens or any damp or exposed location, as it offers no protection against moisture.

How is it installed?

The APUS is a recessed mount fitting that sits flush in the wall. A suitable recess is formed in the wall surface and the square 75 x 75 mm front plate finishes neatly against it, ideal at the foot of stairs or along a hallway.

How do I keep it clean?

Wipe the polished stainless steel face with a soft, dry or slightly damp cloth to remove dust and marks. Avoid abrasive cleaners so the steel finish stays bright over its 50,000 hour rated life.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Light source

Integrated LED

Energy-efficient integrated LED, ready to install with no bulbs to buy.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

Our Reviews

From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

Featured Projects

Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

Description

The APUS is a recessed LED step light that sits flush in the wall, drawing 1.3W direct from a 220-240V AC mains supply. It puts out 15 lumens in a crisp 6500K daylight tone, giving a low-level glow rather than full room brightness. Wired straight to mains, it needs no separate 12V transformer, which keeps the install simple. In US terms a fitting like this is sold as a recessed step light, marking edges and low wall lines along a stairway.

The APUS suits indoor stairs, hallways and landings where a soft marker light makes steps easier to read at night without flooding the space. Its 15-lumen output is meant for orientation, not ambient lighting, so think of it as edge marking along a staircase or a gentle wash down a wall face near the floor. Mount it at the foot of a flight or along a corridor skirting line to pick out the route. It is rated IP20, so keep it to dry indoor positions and clear of bathrooms, porches or any damp setting.

Built from polished stainless steel with a plastic body, the APUS measures 75 x 23 x 75 mm and weighs 120g, with a square front plate. It recesses into the wall for a flush finish that sits neatly against the surface. The fitting is not dimmable and carries a rated life of 50,000 hours, so it should run for years with little attention. The stainless steel face wipes clean and resists everyday marks. Wider Apus options are available across the range if you need matching fittings nearby.

Specification
Power 1.3W
Voltage 220-240 AC
Luminous flux 15 lm
Efficiency 12 lm/W
Colour temperature 6500K
Colour rendering (CRI) Ra 80
IP rating IP20
Dimmable No
Mounting Recessed Mount In The Wall
Lifespan 50,000 hours
Shape Square
Dimensions 75 × 23 × 75 mm
Weight 120 g
Material Polished Stainless Steel, Plastic
Finish Stainless Steel
Frequently Asked

Does this step light need a separate 12V transformer?

No. The APUS runs on 220-240V AC mains, so it wires straight in with no external 12V transformer or driver required. This makes it simpler to fit into an existing lighting circuit.

Can it be used outdoors or in a bathroom?

No. It is rated IP20, which means dry indoor use only. Keep it clear of bathrooms, porches, gardens or any damp or exposed location, as it offers no protection against moisture.

How is it installed?

The APUS is a recessed mount fitting that sits flush in the wall. A suitable recess is formed in the wall surface and the square 75 x 75 mm front plate finishes neatly against it, ideal at the foot of stairs or along a hallway.

How do I keep it clean?

Wipe the polished stainless steel face with a soft, dry or slightly damp cloth to remove dust and marks. Avoid abrasive cleaners so the steel finish stays bright over its 50,000 hour rated life.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.