Andromeda LED Glass Pendant Light 5W 3000K - Light Gold & Copper Frosted

The Andromeda is a 120mm glass pendant light built around a frosted inner cone nested inside a copper-toned outer glass shade, suspended from a light gold ceiling rose on a black fabric cable. The integrated 5W LED inside the frosted cone emits 500 lumens of 3000K warm white light, which diffuses through the frosted glass and reflects off the copper-toned outer layer, creating a warm metallic glow.

Designed for kitchen islands, dining areas, hallways and bedroom reading positions, the Andromeda works as a single focal point or in multiples over a bar or counter run. The 2000mm maximum drop is adjustable on installation, allowing the pendant to hang anywhere from 230mm to 2m below the ceiling rose. The compact 120mm diameter suits low ceilings and smaller rooms where a larger pendant would overwhelm the space.

The copper-toned outer shade is transparent glass with a metallic finish applied to the inner surface, so the tone shifts depending on viewing angle and ambient light conditions. The frosted inner cone hides the LED module completely and prevents glare, while the light gold canopy and decorative section at the top of the pendant tie the metallic palette together. At 0.39kg the pendant is light enough for standard plasterboard ceiling fixings.

Is the Andromeda dimmable?

No. The integrated LED runs at fixed output on standard 220-240V mains. The 500 lumens at 3000K provides ambient rather than task-level brightness, suitable for general room lighting or accent use.

What ceiling height does it need?

The adjustable drop ranges from 230mm to 2000mm. For use over a kitchen island or dining table, the pendant typically sits 700-900mm above the surface, which suits rooms with 2.4m or higher ceilings. The compact 120mm diameter also works well in rooms with lower ceilings when the drop is shortened.

Can I install multiple Andromeda pendants together?

Yes. The small diameter and light weight make it practical to hang two or three Andromedas in a row over a kitchen island, bar or long dining table. Space them 400-600mm apart for balanced coverage.

How is the copper tone applied?

The copper tone is a metallic finish applied to the inner surface of the transparent outer glass shade. This creates a reflective layer that shifts tone depending on viewing angle and ambient light, while the frosted inner cone diffuses the LED light evenly.