ANBAR LED 37W Round Ceiling Light Colour Selectable - White and Brown

The ANBAR LED is a round surface-mounted ceiling light that draws 37W from a 220-240V AC supply and puts out up to 2170 lumens at its 4000K setting. The colour temperature is selectable across 3000K to 6500K, so the same fitting can run a soft warm white through to a crisp daylight tone. A wide 120 degree beam spreads the light evenly rather than pooling it, and at 550mm across with a low 75mm profile it sits close to the ceiling as a flush round fitting. North American buyers will recognise this format as a flush mount LED ceiling light.

Output at general lighting levels covers roughly 7 to 13 m², which suits a bedroom, hallway, landing or a modest living room as the main ambient source. The 120 degree spread and the slim depth make it a sensible choice for rooms with lower ceilings, where a deep or hanging fitting would feel intrusive. Being colour selectable, it can sit at a warmer tone in a bedroom or step up to a cooler, brighter setting in a kitchen or home office, which gives one fitting some flexibility across different rooms in a home.

The body is steel in a white and brown finish, with the LED integrated into the fitting rather than using a replaceable bulb, so there is nothing to swap out across its rated 25,000 hour lifespan. It is rated IP20, which means it is for dry indoor use only and should be kept out of bathrooms, porches and any damp or exposed location. The light is not dimmable and runs at a fixed output once the colour temperature is set. Mounting is to the ceiling surface using the supplied fixings. The ANBAR LED is part of our wider round ceiling range, with other sizes and outputs available.

What size room does this suit?

At general lighting levels its 2170 lumen output covers around 7 to 13 m², which works well as the main light in a bedroom, hallway, landing or smaller living room. For larger or task-heavy spaces you may want a second fitting or a higher-output model from the range.

Can the colour temperature be changed?

Yes. The ANBAR LED is colour selectable across 3000K to 6500K, letting you choose a warm white, a neutral tone or a cool daylight setting to match the room. The selection is made on the fitting rather than via a separate switch.

Does it use a replaceable bulb?

No. The LED is integrated into the fitting, so there is no bulb to change. It is rated for 25,000 hours of use, after which the whole unit is replaced rather than relamped.

How do I clean it?

Switch the light off and let it cool, then wipe the diffuser and steel body with a soft, slightly damp cloth. Avoid abrasive cleaners or solvents, which can mark the finish and cloud the diffuser over time.