Amelia LED Crystal Flush Ceiling Light 4200K 18W - Polished Chrome

The Amelia is a 300mm square flush ceiling light with a polished chrome frame surrounding a clear glass centre panel and a border of small faceted crystals. An integrated 18W LED behind the glass delivers 1500 lumens of cool white 4200K light through the clear centre, while the crystals around the perimeter reflect and scatter light into multiple highlights across the ceiling plane.

Designed for rooms with ceiling heights under 2.4m where a pendant would hang too low, the Amelia sits just 72mm below the ceiling surface once fitted. This makes it suitable for small bedrooms, compact entrance halls, bathrooms (check IP rating compatibility), and hallways in flats or apartments. The flush mounting pairs with standard UK ceiling roses and the integrated LED removes the need for separate bulbs or lampholders.

The polished chrome finish provides a reflective metallic edge that pairs with contemporary interiors featuring chrome taps, handles and light switches. The 4200K colour temperature sits between warm white and daylight — cooler than the typical 3000K used in living rooms but warmer than office daylight tubes — making it a middle ground for task-oriented spaces like kitchens, bathrooms and dressing areas. The crystal border is cut glass rather than acrylic, giving sharper light refraction and a harder faceted appearance when viewed from below.

Is the Amelia suitable for low ceilings?

Yes. The 72mm projection makes it one of the lower-profile flush ceiling lights available. It works in rooms with ceiling heights as low as 2.2m without dominating the space or creating a claustrophobic overhead presence.

Is it dimmable?

No. The integrated LED is non-dimmable and operates at a fixed 18W output. Installing a dimmer switch will not reduce the light output and may damage the driver.

What colour temperature is 4200K?

4200K is cool white — cooler than the warm white (2700K-3000K) typically used in living rooms, but warmer than daylight bulbs (5000K+). It gives a clean, neutral light that suits task-oriented spaces like bathrooms, kitchens and utility rooms.

How is the crystal border cleaned?

The crystals are cut glass. Wipe gently with a dry microfibre cloth to remove dust. For stubborn marks, a barely-damp cloth with distilled water is acceptable — avoid spraying glass cleaner directly onto the fitting as it may seep into the LED housing.