Description
Here is a light and a fan in one fitting, with wood-finished blades reaching 83cm across and a slim white body above them. The LED sits behind a diffuser at the centre and gives 6400 lumens, which is plenty for a main light, and it tunes from a warm domestic white through to a crisp cool white. Brightness and colour are set from the supplied remote, so you can drop it to a low glow in the evening and bring it back up in the morning. The fan runs independently of the light.
We would fit this in a bedroom or a home office, anywhere a ceiling has room for a single fitting rather than a pair. In summer the fan keeps air moving without the clatter of a table fan; the rest of the year it simply reads as a quiet ceiling light. It suits open-plan kitchens and dining areas too, where a pendant over the table would sit in the way. The remote means nobody has to reach up to change speed or brightness.
The wood finish on the blades is warm rather than glossy, and it sits comfortably against white plaster and pale timber floors; the white housing keeps the whole thing quiet on the ceiling. Dust gathers on the top edge of the blades more than anywhere else, so a lambswool duster run along them now and then is all it asks, with the power off at the switch first. The LED is built in and driven by its own gear, so there are no lamps to buy and none to change. It carries a five year warranty. We stock it in this wood and white pairing, and it is the one we suggest when a room needs cooling as well as lighting.
Specification
| Colour |
Wood |
| Second Colour |
White |
| Weight |
4.30KG |
| Diameter |
488/830mm |
| Height |
215mm |
| Materials Used |
Iron, PC |
| Energy Class |
C |
| Energy Class of Lamp |
Group C |
| Max Energy Class |
C |
| Min Energy Class |
C |
| Lamp |
1 x 40W integrated LED (no lamps to fit) |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Colour Temperature |
3000 - 5000K Tuneable White (±5%) |
| Number of Switching Cycles |
10000 |
| LED Power |
40W (±5%) |
| Lumens per Watt (lm/W) |
160lm/W (±5%) |
| System Flux |
6400lm (±5%) |
| CRI |
>80 |
| Light Distribution |
Ambient |
| Driver Included |
Yes |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption |
65W (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Switch |
Yes - Remote Control |
| Dimmable |
Yes - Remote Control |
| Dimmer Included |
Yes - Remote Control |
| IP Rating |
IP20 |
| Average Life |
25000hrs |
| Warranty |
5yrs |
| UKCA/CE |
Yes |
| Remote Control Information |
R00137 |
| Pieces Included |
1 |
| Unassembled |
Yes-Requires Construction |
| Installation |
Requires Installation By Qualified Electrician |
| Sloped Ceiling Compatible |
No |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
Do I need a separate dimmer for it?
No. Dimming is handled by the supplied remote handset, which also sets the colour temperature and controls the fan.
What range of white light does it give?
It tunes from 3000K warm white through to 5000K cool white, with a total output of 6400 lumens from the 40W LED.
How large is it?
The blades span 830mm, the central body measures 488mm across, and the overall height is 215mm. It weighs 4.3kg.
Can the fan be used without the light on?
Yes. The 25W DC fan and the LED are operated separately from the remote, so you can run either on its own.
What are the blades made of?
They carry a wood finish, set against a white housing.
Will the LED need replacing?
The LED is integrated and rated at around 25,000 hours, so there is nothing to change during normal use. Wipe the diffuser with a dry cloth only, never a wet one.