Akvo 23W LED Ceiling Light Rectangular IP44 - White

The Akvo is a rectangular LED ceiling light running 23W from a 220-240V AC supply, putting out 2750 lumens at a 4000K cool-white tone with an efficiency of 120 lm/W. As an integrated fitting there is no separate bulb to fit or replace, so the light source sits flush within the slim white body and reads as a single clean plane on the ceiling. North American buyers shopping for a flush mount LED ceiling light will recognise the same low-profile format, sized to sit close against the surface rather than hang from it.

The neutral 4000K output suits everyday rooms where a clear, even light helps, covering around 9 m² at general lighting levels, which makes it a sensible fit for a bathroom, hallway, utility or compact kitchen. With its IP44 splash rating it can be used in bathroom zones away from direct spray and in covered outdoor spots such as a porch or carport, though it should be kept clear of fully exposed positions, direct water jets and any standing water. On lower ceilings the flush profile is an advantage, since it keeps the fitting tight to the surface and out of head height in passageways.

The body is aluminium alloy in a white finish, with the IP44 seal making it suitable for damp and sheltered locations. It can be wall or ceiling mounted, fixing directly to the surface, and at 884 g it is light enough to handle on a single bracket. The LED module is rated for 25,000 hours and this version is not dimmable, so it is best paired with a standard on/off switch. The Akvo range includes further sizes and outputs for matching fittings across several rooms.

What size room does it light?

At 2750 lumens it covers around 9 m² at general lighting levels, so it works well in a bathroom, hallway, utility or compact kitchen. For larger or busier rooms you would pair two fittings or step up to a higher-output model in the range.

Is the Akvo dimmable?

No, this version is not dimmable and is designed to run from a standard on/off switch. Wiring it to a dimmer is not recommended as it can cause flicker or shorten the life of the LED module.

Can it be used in a bathroom or outside?

Yes, the IP44 splash rating suits bathroom zones away from direct spray and covered outdoor spots like a porch or carport. It should not be used in fully exposed positions, under direct water jets or anywhere subject to standing water.

How do I clean the fitting?

Switch it off and let it cool, then wipe the white surface with a soft, slightly damp cloth and dry it off. Avoid abrasive pads and solvents, which can mark the finish and disturb the IP44 seal.