Description
The Akvo is a rectangular LED ceiling light running 15W direct from a 220-240V AC supply and delivering 1600 lumens at a neutral 4000K. With the LED built in, there is no separate bulb to fit or replace, and at 107 lm/W the fitting holds a steady, even output across its face. Buyers shopping the American market will recognise this format as a low-profile flush mount ceiling light, the integrated style that sits close to the surface rather than hanging from a stem.
Around 1600 lumens covers roughly 5 m² at general lighting levels, which makes the Akvo a sensible single fitting for a compact bathroom, a hallway, an en-suite or a utility area. The 4000K tone reads as a clean neutral white that keeps grooming and task corners crisp without tipping into a cold blue. Its low body suits ceilings of standard height, where the close mounting avoids crowding headroom, and the rectangular shape lines up neatly along a corridor or above a basin run.
Construction is an aluminium alloy body in a black finish, with the IP44 rating giving splash resistance suited to bathroom zones away from direct spray and to sheltered spots such as a porch or carport. Keep it clear of fully exposed positions, direct water jets and any submersion. The fitting weighs 560 g and can be wall mounted or ceiling mounted, with the driver gear contained inside the unit so it wires straight to the mains. This 15W version is not dimmable, and it sits within the wider Akvo range, which offers further wattages and finishes.
Specification
| Power |
15W |
| Voltage |
220-240 AC |
| Luminous flux |
1600 lm |
| Efficiency |
107 lm/W |
| Colour temperature |
4000K |
| Colour rendering (CRI) |
Ra 80 |
| IP rating |
IP44 |
| Dimmable |
No |
| Mounting |
Wall Mounted, Ceiling Mounted |
| Lifespan |
25,000 hours |
| Shape |
Rectangular |
| Weight |
560 g |
| Material |
Aluminium Alloy |
| Finish |
Black |
Downloads
Frequently Asked
How large a room will this light cover?
At 1600 lumens it suits a space of around 5 m² at general lighting levels, such as a compact bathroom, en-suite, hallway or utility room. For larger or open areas, plan on more than one fitting to keep the light even.
Can it be used in a bathroom?
Yes. The IP44 rating gives splash resistance suited to bathroom zones away from direct spray, as well as covered outdoor spots like a porch or carport. It should not be used in fully exposed positions or where it would face direct water jets.
Does it take a replaceable bulb?
No. The Akvo uses an integrated LED, so the light source is built into the fitting rather than fitted as a separate bulb. The LEDs are rated for 25,000 hours of use.
How should the fitting be cleaned?
Switch off the power and wipe the surface with a soft, dry or slightly damp cloth, then dry it fully before turning the supply back on. Avoid abrasive pads and harsh solvents, which can mark the black aluminium finish.