Description
This is a fixed downlight with a polished chrome bezel, mirror-bright and shallow in profile, sized for a 75mm cut-out. It takes a single GU10 lamp of up to 50W, and we would put a good LED reflector in it and leave it be. Dimming is possible where the lamp itself is a dimmable one. It is fire rated and sealed against dust and splashing water, so it earns its keep in rooms where steam and spray are part of daily life. The light throws straight down rather than tilting, which keeps a run of them reading evenly across a ceiling.
Bathrooms and shower rooms are the obvious home for it, and the chrome sits comfortably beside taps, towel rails and mirror frames. It works just as well over a kitchen worktop, in a utility, or along a hallway where a pendant would only be in the way. We reach for downlights like this when the ceiling should disappear and only the light should show. Space them out for general brightness, or bring them closer above a shower tray or a sink where you want the light concentrated.
The bezel is polished to a clear, reflective chrome, and the body is compact for a fitting of this sort. To clean it, switch off at the wall and let the lamp go cold, then wipe the bezel with a soft damp cloth and dry it at once so the chrome keeps its shine; skip abrasives and bathroom sprays, which dull a polished finish quickly. Wiring is a job for an electrician on a standard household circuit. It carries a three year warranty. We stock this same sealed fitting in white and satin nickel at this cut-out size, and there is an adjustable version in the range if you would rather angle the beam towards a wall or a shower. Lamps are supplied separately.
Specification
| Colour |
Polished Chrome |
| Ceiling Mountable |
Yes |
| Weight |
0.30KG |
| Width |
120mm |
| Diameter |
87mm |
| Height |
90mm |
| Cut Out |
75mm |
| Materials Used |
Metal, Intumescent Coating |
| Energy Class |
A++ to A |
| Max Energy Class |
A++ |
| Min Energy Class |
A |
| Lamp |
1 x GU10 50W max (lamps not included) |
| Lamp Cap |
GU10 |
| Recommended Lamp |
LED (50mm Reflector) |
| Light Distribution |
Down |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption |
Dependent On Lamps Used (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Dimmable |
Yes - Dimmable Lamps Required |
| IP Rating |
IP65 |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. |
| Country of Origin |
China |
Frequently Asked
What size hole does it need?
It is made for a 75mm cut-out. The visible bezel measures 87mm across, so it covers the aperture neatly.
Which lamp should I fit?
A GU10 LED with a 50mm reflector body, rated no higher than 50W. Lamps are not included.
Can I dim it?
Yes, provided you fit a dimmable GU10 lamp and pair it with a compatible dimmer.
Is it suitable for a bathroom?
It is rated IP65, so it is sealed against dust and water jets and is at home in bathrooms, shower rooms and above sinks.
How deep is the fitting?
It stands 90mm tall overall, with a width of 120mm across the springs, and weighs 0.3kg.
What warranty applies?
The downlight carries a three year manufacturer's warranty.