Description
A recessed downlight with a satin nickel bezel and a tilting lamp holder, so the beam can be angled rather than dropped straight down. It sits into a 75mm cut-out and takes a single GU10 lamp, up to 50W, which means you can pick the beam and colour temperature to suit the room and change your mind later without touching the fitting itself. The fitting is fire rated, and the soft grey sheen of the nickel keeps it quieter overhead than a bright chrome ring.
We reach for an adjustable head like this wherever light needs to go somewhere in particular: washing a run of kitchen units, picking out a painting on a hallway wall, or lifting a shelf of books that a fixed downlight would leave in shadow. It is equally useful in rooms with a sloping ceiling, where the tilt brings the beam back to vertical. Mixed with fixed heads across a larger ceiling it gives you general light and accent light from the same range of bezels. Dimming is possible where the lamp you choose is a dimmable one and the circuit is set up for it. Being rated for dry indoor rooms, keep it to living spaces, landings and bedrooms rather than shower zones.
The bezel carries a fine satin nickel finish that resists showing fingerprints, and the whole fitting is light in the hand. To keep it looking right, wipe the visible ring now and then with a barely damp cloth once the lamp has gone cold, and avoid cream cleaners or anything abrasive that would dull the sheen. It carries a three year warranty. We stock the adjustable version in white and polished chrome as well, plus fixed heads in all three finishes for the runs where aiming is not needed, so a whole ceiling can be kept consistent. Lamps are supplied separately.
Specification
| Colour |
Satin Nickel |
| Ceiling Mountable |
Yes |
| Weight |
0.30KG |
| Width |
120mm |
| Diameter |
90mm |
| Height |
90mm |
| Cut Out |
75mm |
| Materials Used |
Metal, Intumescent Coating |
| Energy Class |
A++ to A |
| Max Energy Class |
A++ |
| Min Energy Class |
A |
| Lamp |
1 x GU10 50W max (lamps not included) |
| Lamp Cap |
GU10 |
| Recommended Lamp |
LED (50mm Reflector) |
| Light Distribution |
Down |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption |
Dependent On Lamps Used (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Dimmable |
Yes - Dimmable Lamps Required |
| IP Rating |
IP20 |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. |
| Country of Origin |
China |
Frequently Asked
What size hole does this downlight need?
It is designed for a 75mm cut-out, with an overall bezel diameter of 90mm.
Which lamp should I use?
A GU10 lamp, ideally an LED reflector of the 50mm type, up to a maximum of 50W.
Can I dim it?
Yes, provided you fit a dimmable GU10 lamp and pair it with a compatible dimmer.
Is it suitable for a bathroom?
No. This one is rated IP20, so it belongs in dry rooms. We stock IP65 fixed versions in the same range for bathroom use.
How far can the head be angled?
The lamp holder tilts within the bezel so you can aim the beam off vertical towards a wall, worktop or picture.
What warranty comes with it?
It carries a three year warranty.