Description
Satin nickel with a soft, low-shine sheen, this is a small recessed fitting with a fixed bezel, so the light goes straight down and stays where it is put. It takes a single GU10 lamp of up to 50W, which means you choose the brightness, colour temperature and beam spread yourself. The cut-out is 68mm, the common size for domestic ceilings, and the trim ring is narrow, so very little of the fitting reads from below.
We reach for fixed downlights like this one when a room needs even, quiet general light: kitchens, hallways, landings, a living room ceiling set out in a grid. Because the beam does not tilt, plan them as an overall wash rather than for aiming at pictures or the front edge of a worktop, where an adjustable head serves better. It is a fire rated fitting, and it belongs in dry rooms, so kitchens and circulation spaces rather than a shower area; there is a sealed version in the same finish within the range for that job. We would put a dimmable LED reflector lamp in here and run it from a trailing edge dimmer, since the fitting dims only as far as the lamp allows.
The bezel carries a satin nickel finish that reads grey rather than yellow, and it sits happily beside brushed steel appliances and nickel switch plates. Wipe the trim with a barely damp cloth once the lamp has gone cold, and keep metal polishes and cream cleaners well away from the finish. It carries a three year warranty. The same downlight is offered in white and polished chrome at this cut-out, and adjustable versions are made in the same finishes if you would rather angle the light. Lamps are not included.
Specification
| Colour |
Satin Nickel |
| Ceiling Mountable |
Yes |
| Weight |
0.25KG |
| Width |
120mm |
| Diameter |
80mm |
| Height |
90mm |
| Cut Out |
68mm |
| Materials Used |
Metal, Intumescent Coating |
| Energy Class |
A++ to A |
| Max Energy Class |
A++ |
| Min Energy Class |
A |
| Lamp |
1 x GU10 50W max (lamps not included) |
| Lamp Cap |
GU10 |
| Recommended Lamp |
LED (50mm Reflector) |
| Light Distribution |
Down |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption |
Dependent On Lamps Used (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Dimmable |
Yes - Dimmable Lamps Required |
| IP Rating |
IP20 |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. |
| Country of Origin |
China |
Frequently Asked
What size hole does it need?
It is made for a 68mm cut-out. The outer diameter is 80mm, so the trim covers the opening with a slim margin around it.
Which lamp should I buy?
A GU10 LED reflector lamp, 50mm diameter, rated at no more than 50W. Choose the beam angle to suit the room: narrower for a defined pool of light, wider for general cover.
Can it be dimmed?
Yes, provided the lamp you fit is a dimmable one and it is paired with a suitable dimmer. The fitting itself puts no limit on this beyond the lamp.
Does the head tilt?
No, this version is fixed and throws the light straight down. If you want to angle the beam, the adjustable Agni downlight takes a 75mm cut-out.
Is it suitable for a bathroom?
It is rated for dry indoor rooms only. For bathrooms and shower zones, choose the sealed Agni downlight, also available in satin nickel.
What warranty does it have?
It carries a three year warranty from the manufacturer.