Aethera 40cm Cone Lampshade - Black Fabric

The Aethera is a 40cm diameter cone lampshade in black fabric with a white interior lining. The tapered drum shape narrows from a 40cm top diameter to a slightly smaller base, creating a classic cone silhouette that suits both pendant conversions and table lamp bases. The black outer fabric diffuses light while the white lining inside reflects it downwards and outwards.

Designed as a replacement shade for pendant fittings, table lamps and floor lamps with compatible fittings, the Aethera suits bedrooms, living rooms, hallways and dining areas where a neutral shade is needed to match existing décor. The 40cm diameter works over side tables, bedside tables and console tables, or as a pendant shade hung 60-80cm above a dining table or kitchen island. The fabric construction softens the light output compared to glass or metal shades.

The black fabric outer surface absorbs ambient light during the day, presenting as a solid matt black form when the lamp is off. When lit, the white lining reflects the bulb's output while the black fabric controls glare and prevents light spill upwards. The 40cm size provides enough coverage for E27 or E14 bulb fittings without overwhelming smaller rooms, and the cone taper prevents the shade appearing too boxy or squat on a base.

What fitting type does the Aethera use?

Lampshade fitting types vary by manufacturer and intended use. Check the product specification or contact us to confirm the fitting type (duplex, European spider, ES pendant adaptor ring) before ordering if you need to match an existing lamp base or pendant fitting.

Can it be used on a pendant fitting?

Yes, provided the pendant fitting uses a compatible shade carrier or adaptor ring. Many ES and E27 pendant fittings accept cone shades via a threaded ring or clip-on carrier. Confirm compatibility with your specific fitting before purchase.

What bulb wattage is suitable?

Fabric shades typically tolerate up to 60W incandescent equivalent or 10-15W LED. Higher wattages risk scorching the fabric over time. Use a warm-white LED between 6-10W for general ambient lighting through the shade.

How is the fabric shade cleaned?

Use a soft brush attachment on a vacuum cleaner at low power to remove dust. For marks, a lint roller or barely-damp microfibre cloth on the outer surface works, but avoid soaking the fabric or using household cleaners, which may stain or discolour the material.