ADTR 1200x300 Surface Ceiling Light - White

The ADTR is a surface-mounted LED ceiling light with a clean rectangular form, measuring 1200 x 300 x 45 mm and finished in white. It fixes flat against the ceiling rather than recessing into it, so it suits rooms where there is no void above the plasterboard to drop a fitting into. As an integrated LED fitting it has no replaceable lamp, the light source sits behind a diffused face that spreads the output evenly across the panel rather than throwing it from a single point. American shoppers will recognise this slim surface format as a flush mount led ceiling light, sitting close to the ceiling line with a low 45 mm profile.

The long, narrow footprint makes the ADTR a practical choice for spaces that benefit from an even wash of light along their length, such as a hallway, a landing, a galley kitchen or a home office run. The 1200 mm length lets it cover a corridor or a worktop line that a round fitting would leave patchy at the ends. It is well suited to standard and lower ceilings given its shallow depth, keeping the fitting clear of head height in tighter rooms. For larger or longer rooms, two units placed in line give a continuous, balanced spread without dark gaps between them.

The fitting is built around a diffused light face set in a white housing, with the LED module integrated rather than user-replaceable. It is mounted directly to the ceiling surface and carries an IP20 rating, which means it is intended for dry indoor rooms only and should be kept clear of bathrooms, damp areas and any outdoor position. At 1.46 kg it is light enough to fix to most ceiling substrates with appropriate fixings. The white finish keeps it discreet against a painted ceiling. This range is also offered in further sizes for matching across rooms.

What size room does this light suit?

Its long 1200 mm rectangular form is built to wash light evenly along a length rather than from a central point, so it works well in hallways, landings, galley kitchens and home offices. For larger or longer rooms, fitting two units in line keeps the spread continuous. The narrow 300 mm width makes it a neat fit over worktop runs and corridors.

Can this light be used in a bathroom or outdoors?

No. The ADTR is rated IP20, which means it is suitable for dry indoor use only. Keep it out of bathrooms, shower areas, damp utility spaces and any outdoor or sheltered-outdoor position, where a higher IP-rated fitting is required.

Does it take a replaceable bulb?

No, the ADTR uses an integrated LED light source rather than a separate lamp. There is no bulb to change, the module is built into the fitting behind the diffused face. This keeps the profile slim at just 45 mm deep.

How do I clean the fitting?

Wipe the diffused face and white housing with a soft, dry or barely damp cloth to lift dust and marks. Avoid abrasive cleaners or solvents that could mark the diffuser, and never spray liquid directly onto the fitting. Make sure the light is switched off and cool before cleaning.