Description
The Adn is a compact LED wall light with a single adjustable light head mounted on a circular white epoxy backplate. The integrated 3W LED produces 165 lumens of warm 3000K light through a frosted diffuser set into the head, which pivots on its axis to direct light up, down or at an angle. The entire fitting measures 70mm wide by 140mm high with an 80mm projection from the wall.
Designed for hallways, bedrooms, reading corners and staircases where accent or task lighting is needed without ceiling fittings, the Adn works as a single installation or in multiples along a corridor or either side of a bed. The 110° beam angle spreads light broadly enough to wash a section of wall or illuminate a small area for reading without creating harsh focal points. The adjustable head allows the light direction to be changed after installation without rewiring.
The white epoxy finish is smooth and low-gloss, blending into white or light-toned walls without adding colour contrast. The form references branching geometric structures with a vertical rod rising from the circular base and the bulb head offset at mid-height. At 0.2kg the fitting sits flat against the wall without requiring specialist fixings on plasterboard. The LED is rated at 3W on 100-240V mains, making it suitable for worldwide installation.
The LED is integrated, so the fitting is the service unit when it reaches end of life. The Adn is covered by a 3-year warranty.
Specification
| Colour Finish 1 |
White |
| Width |
70mm |
| Height |
140mm |
| Projection |
80mm |
| Number Of Bulbs |
1 |
| Lamp Socket |
Integrated LED |
| Colour Temperature |
3000K Warm White |
| Beam Angle |
110° |
| Lumen |
165lm |
| Power Consumption |
3W |
| Voltage |
100-240V~50/60Hz |
| Dimmable |
No |
| Weight |
0.2KG |
| Warranty |
3 Year |
Frequently Asked
Is the Adn dimmable?
No. The integrated 3W LED runs at fixed brightness on mains power and is not compatible with dimmer switches.
Can the LED be replaced when it fails?
No. The LED module is integrated into the head, so the fitting is replaced as a unit when the LED reaches end of life.
How bright is 165 lumens?
This output suits accent lighting, hallway guidance, or bedside reading rather than primary room illumination. For brighter task lighting, multiple Adn units can be installed in series.
Can the light head be adjusted after installation?
Yes. The head pivots on its mount, allowing the light direction to be angled up, down or to either side without rewiring or removing the fitting from the wall.