Adn 24 Light LED Dimmable Chandelier 658mm - White

The Adn is a 658mm sculptural LED chandelier built around 24 integrated LEDs mounted on articulated white epoxy-finished arms that radiate from a central hub. Each LED sits behind a diffuser cone at the end of an individual arm, creating a multi-directional light source that casts 4450 lumens of 3000K warm white light across a 110° beam angle. The 72W integrated LED array is dimmable with a suitable trailing-edge or leading-edge dimmer.

Designed for high-ceiling spaces where the fitting can be appreciated from below and from multiple angles, the Adn suits dining areas with ceiling heights of 2.7m or above, double-height entrance halls, and commercial reception areas. The adjustable drop ranges from 350mm minimum to 1500mm maximum, allowing the chandelier to be set at the correct height for a dining table (typically 700-800mm above the surface) or left higher for purely ambient use. The white finish on the metal arms keeps the visual weight low despite the 658mm span and 2kg mass.

Each of the 24 arms extends at a slightly different angle, giving the Adn an asymmetric, organic silhouette that changes as you move around it. The diffuser cones soften the LED output and prevent glare when the fitting is viewed from below. The white epoxy finish pairs with contemporary interiors, Scandinavian schemes, and minimalist commercial spaces where the fitting needs to provide substantial light output without visual bulk. The 3000K colour temperature matches incandescent warmth and sits comfortably alongside natural materials.

What type of dimmer does the Adn need?

The integrated LED requires a trailing-edge (electronic) dimmer for smooth dimming without flicker. Leading-edge dimmers designed for incandescent bulbs may cause buzzing or limited dimming range. Check that your dimmer is rated for LED loads and has a minimum load that matches or is lower than 72W.

What ceiling height is needed?

The 658mm diameter and multi-directional arms mean the Adn needs space to be appreciated. Ceiling heights of 2.7m or above work best, especially if the chandelier is set to the 700-800mm drop typical for dining table installations. Lower ceilings can accommodate the fitting at the 350mm minimum drop for purely ambient use.

Can the arms be adjusted after installation?

No. The arms are fixed at the factory in their asymmetric configuration. The adjustable element is the cable drop height, which can be set anywhere between 350mm and 1500mm during installation.

How bright is 4450 lumens?

4450lm is equivalent to approximately five 75W incandescent bulbs or six 60W incandescent bulbs. This is substantial output for a single fitting and provides enough ambient light for a 20-25m² dining or living area without additional lighting.