Description
This is a small clear lever connector that takes three conductors, one to each lever, and holds them without solder or a screwdriver. Each lever lifts to open its port, presses down to clamp, and lifts again if you need to release a core and start over. Because the housing is clear, you can see at a glance that a wire is fully home and that no copper is sitting proud. They come as a pack of ten, which is usually more than a single job asks for and exactly right for a tin of spares.
We reach for these when joining or extending lighting flex: rewiring a pendant, adding a little length to a short lead, or bringing a run together tidily behind a fitting. The lever action suits anyone working overhead, where a screwdriver and two free hands are one hand too many, and it is forgiving for people who are competent without doing this every week. Keep them to dry indoor rooms; they are not meant for damp, cold or exposed positions.
The housing is clear right through, levers included, and at 23mm across it will sit inside most enclosures without crowding what is already in there. Nothing needs upkeep: with the power off, a dry cloth over the body is plenty, and a glance at the levers confirms they are still pressed fully shut. Each connector carries a one year warranty. We stock the rest of this range alongside it, including cable grips in clear and black, E27 lampholders in black and white, and made-up leads with IEC plugs, so a small rewiring job can be put together in one go rather than in three orders.
Specification
| Colour |
Clear |
| Weight |
0.07KG |
| Length |
20mm |
| Width |
23mm |
| Height |
11mm |
| Materials Used |
PC |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Pieces Included |
10 |
| Country of Origin |
China |
Frequently Asked
How many wires does one connector take?
Three, one to each lever. Lift the lever, insert the conductor until it is fully home, then press the lever back down to clamp it.
Can I undo it and reuse it?
Yes. Lifting the lever releases the conductor, so you can reposition or re-terminate without cutting anything short.
How big is each connector?
It measures 23mm wide, 20mm long and 11mm high, so it takes up very little room inside an enclosure.
What comes in the pack?
Ten connectors, all clear. Handy if you are doing several light points or want spares to hand.
Is it suitable for a bathroom or outdoors?
No. It is rated for dry indoor use only, so keep it away from damp, unheated and exposed positions.
Does it need any maintenance?
Not really. With the supply isolated, wipe dust off the housing with a dry cloth and check each lever is still fully closed.