Description
Small crystal spheres gather against polished chrome, so the light breaks into bright points rather than arriving as a flat wash. At 23cm wide it is a modest fitting, and a pull switch on the body means it can be worked on its own, independently of the room's main lighting. A single candle lamp with an E14 cap sits behind the crystal; fit a dimmable one and the level can be brought right down of an evening. Nothing about it is heavy-handed: the crystal does the work and the chrome stays quiet behind it.
We would use it in pairs, either side of a bed or a mirror, where the pull switch saves crossing a dark room to the switch by the door. It also works on a landing or in a short hallway, and the shallow projection helps where a corridor is narrow and anything deeper would catch shoulders and bags. It suits a smaller room, where a wider fitting would crowd the wall. Keep it to rooms that stay dry and warm: bedrooms, sitting rooms and halls rather than a shower room or an open porch.
The crystal is set on chromed metal, and polished chrome shows dust and fingermarks sooner than a brushed finish does, so give the metal an occasional going over with a dry soft cloth, and lift any smears from the spheres with a barely damp one, the supply switched off beforehand. It takes up to 20W, which is ample for LED, and it carries a one year warranty. We stock the same wall light in antique brass, and with prism crystal in place of the spheres, and the range runs to matching flush ceiling fittings in round and square shapes. Lamps are not included.
Specification
| Colour |
Polished Chrome |
| Ceiling Mountable |
Yes |
| Weight |
1.10KG |
| Width |
230mm |
| Height |
170mm |
| Projection |
140mm |
| Materials Used |
Iron, Stainless Steel, Crystal |
| Adjustable Height |
No |
| Energy Class |
A++ to D |
| Max Energy Class |
A++ |
| Min Energy Class |
D |
| Lamp |
1 x E14 20W max (lamps not included) |
| Lamp Cap |
E14 |
| Recommended Lamp |
LED (Candle C35) |
| Light Distribution |
Ambient |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption |
Dependent On Lamps Used (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Switch |
Yes - Pull Switch |
| Dimmable |
Yes - Dimmable Lamps Required |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Use white gloves provided when handling crystal and glass. (3) Take care not to dislodge crystal when cleaning. (4) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
What lamp does this wall light take?
It takes one E14 lamp, up to 20W. An LED candle in the C35 shape is what we would fit, as it sits neatly behind the crystal. Lamps are not included.
Can it be dimmed?
Yes, provided you fit a dimmable lamp and pair it with a compatible dimmer. With a standard non-dimmable LED candle it will simply switch on and off.
How is it switched on?
There is a pull switch on the fitting itself, so it can be used without touching the room's wall switch. Handy at a bedside.
What are the exact dimensions?
It measures 230mm wide, 170mm high and projects 140mm from the wall, so it stays close in a tight space.
Is it suitable for a bathroom?
No. It is rated IP20, which is for dry indoor rooms only, so keep it away from splashes and steam.
How do I keep the crystal looking clear?
Dust the spheres with a soft dry cloth and, when they look dull, wipe them with a cloth wrung out almost dry. Avoid sprays and abrasive cleaners, which will mark the chrome.