Description
Prism-cut crystal sits across a polished chrome backplate, catching whatever light is in the room and scattering small bright points onto the wall around it. It measures 23cm across, so it reads more as jewellery than as a large fitting. One E14 candle lamp sits behind the glass, and a pull switch on the body means it can be worked where it hangs rather than from across the room. We would fit a warm LED candle here and leave it at that.
It suits spots that want a little sparkle without much bulk: either side of a bed, along a hallway, beside a mirror in a dressing area, or flanking a chimney breast in a sitting room. The pull switch earns its keep at a bedside, where fumbling for the main switch in the dark helps nobody. Choose a dimmable lamp if you want the level to drop for late reading, since the dimming is done by the lamp rather than the fitting. Keep it to dry rooms, well away from steam and splashes.
The chrome is polished to a bright mirror, and the crystal is faceted so the piece stays lively even with the lamp off. Dust dulls cut glass faster than anything else, so once the power is off and the glass has cooled, run a dry lint-free cloth over the facets now and then; leave polishes and sprays alone, as they settle into the cuts and leave a film. It carries a one year warranty. We stock the same wall light in antique brass, and with rounded sphere crystal in place of the prisms, and the wider range carries it through into flush fittings in both round and square shapes should you want the ceiling to match. Lamps are not included.
Specification
| Colour |
Polished Chrome |
| Ceiling Mountable |
Yes |
| Weight |
1.10KG |
| Width |
230mm |
| Height |
170mm |
| Projection |
140mm |
| Materials Used |
Iron, Stainless Steel, Crystal |
| Adjustable Height |
No |
| Energy Class |
A++ to D |
| Max Energy Class |
A++ |
| Min Energy Class |
D |
| Lamp |
1 x E14 20W max (lamps not included) |
| Lamp Cap |
E14 |
| Recommended Lamp |
LED (Candle C35) |
| Light Distribution |
Ambient |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption |
Dependent On Lamps Used (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Switch |
Yes - Pull Switch |
| Dimmable |
Yes - Dimmable Lamps Required |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Use white gloves provided when handling crystal and glass. (3) Take care not to dislodge crystal when cleaning. (4) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
What lamp does this wall light take?
It takes a single E14 candle lamp, up to 20W. An LED candle in the C35 shape is the sensible choice and keeps the glass cool to handle.
Can I dim it?
Yes, provided you fit a dimmable lamp and pair it with a compatible dimmer. Standard non-dimmable LED candles will flicker or buzz, so check the lamp packaging.
How far does it stand off the wall?
Projection is 140mm, with an overall height of 170mm and a width of 230mm, so it stays clear of a bedside table or a hallway walkway.
Does it need a switch on the wall?
Not necessarily. A pull switch is built into the fitting, so it can be turned on and off at the light itself.
How should I clean the crystal?
Switch off at the wall, let the lamp cool, then dust the facets with a dry lint-free cloth. Avoid glass sprays and polishes, which collect in the cut edges.
Is it suitable for a bathroom?
No. It is rated IP20, which makes it right for bedrooms, hallways and living rooms rather than wet or steamy spaces.