Description
Cut prism crystal sits across a frame finished in antique brass, so the light breaks up and scatters instead of pooling flat on the wall. At 23cm wide this is a small fitting, and the shallow projection keeps it well clear of shoulders in a passing space. A pull switch on the body means it can be worked where it sits, with no need to reach for a switch by the door. It takes an E14 candle lamp, and an LED candle is what we would fit here.
We reach for this beside a bed, where the pull switch does the job of a bedside lamp without giving up space on the table. A pair either side of a chimney breast works just as well, as does a single one in a short hallway or a dressing corner where a table lamp has nowhere to stand. The output is soft and glittery rather than broad, so treat it as one layer among others in a room that already has a main light. Fit a dimmable lamp and it will dim on a compatible circuit.
The metalwork is warm and slightly aged in tone, which keeps the crystal from looking cold, and the prisms are faceted so they catch light from across the room as well as from the lamp behind them. Dust the crystal with a dry lint-free cloth and leave the brass alone beyond a light buff; polishes and sprays will dull the finish over time. This is an indoor fitting for dry rooms such as bedrooms, sitting rooms and landings. It carries a one year warranty. We also stock the same wall light with sphere crystal in place of the prisms, and in polished chrome, and the range runs on into round and square flush ceiling fittings if you want the two to agree overhead. Lamps are not included.
Specification
| Colour |
Antique Brass |
| Ceiling Mountable |
Yes |
| Weight |
1.10KG |
| Width |
230mm |
| Height |
170mm |
| Projection |
140mm |
| Materials Used |
Iron, Stainless Steel, Crystal |
| Adjustable Height |
No |
| Energy Class |
A++ to D |
| Max Energy Class |
A++ |
| Min Energy Class |
D |
| Lamp |
1 x E14 20W max (lamps not included) |
| Lamp Cap |
E14 |
| Recommended Lamp |
LED (Candle C35) |
| Light Distribution |
Ambient |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption |
Dependent On Lamps Used (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Switch |
Yes - Pull Switch |
| Dimmable |
Yes - Dimmable Lamps Required |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Use white gloves provided when handling crystal and glass. (3) Take care not to dislodge crystal when cleaning. (4) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
What size is it on the wall?
It measures 230mm wide and 170mm high, and stands 140mm out from the wall, so it stays tight to the surface in a narrow hallway.
Which lamp should I use?
One E14 candle lamp, C35 shape, up to 20W. An LED candle is the sensible choice and keeps the crystal cooler.
Can I dim it?
Yes, on a compatible dimmer, provided the lamp you fit is itself a dimmable type.
Does it need a separate switch?
No. It has its own pull switch on the fitting, which is why it works so well beside a bed.
How do I clean the crystal?
Switch off at the mains and let everything cool, then dust the prisms with a dry lint-free cloth. Avoid metal polish on the brass.
Is it suitable for a bathroom?
No. It is rated for dry indoor rooms only, so keep it away from splashes and steam.