Description
This is a slimline LED batten drawing 60W and putting out 6600 lumens, which works out at roughly 110 lumens per watt. The LEDs sit behind a one-piece opal diffuser, so there is no fluorescent tube to buy, fit or replace later on. The housing is white with a shallow curved profile and rounded end caps, and one end cap carries a small slide switch. Colour temperature is adjustable, which means the shade of white is set on the fitting itself rather than chosen at the point of purchase.
6600 lumens is a lot of light from one fitting, so this suits spaces where you want to see properly rather than set a mood: a single garage, a workshop bench, a utility room, a store cupboard, a small office or a kitchen ceiling above a working area. Battens surface mount straight onto a ceiling or a wall, which makes them the straightforward answer where there is no void to recess into, and the flat slim housing sits closer to the ceiling than an older tube and reflector. Two or more can be run in a line down a longer space.
Warmer settings suit a room you also sit in; cooler settings hold colours truer over a bench or a worktop, which matters if you are matching paint or sorting wiring. The manufacturer does not state whether the driver will dim, so plan on a plain wall switch. No IP rating is stated either, so we would keep this one to dry indoor locations. It is sold as a single fitting, with a minimum order of one and in multiples of one, so you can buy exactly the number of runs a room needs.
Specification
| Type |
Slimline LED batten |
| Light source |
Integrated LED |
| Wattage |
60W |
| Brightness |
6600lm |
| Colour temperature |
CCT adjustable, set on the fitting. The individual settings are not stated by the manufacturer |
| Finish |
White |
| IP rating |
Not stated by the manufacturer |
| Dimmable |
Not stated by the manufacturer |
| Sold as |
1 fitting |
| Minimum order |
1, sold in multiples of 1 |
Frequently Asked
Do I need to buy a tube for it?
No. The LEDs are built into the fitting behind a fixed opal diffuser, so there is nothing to fit at the start or swap out later.
What does CCT adjustable mean here?
The shade of white is chosen on the fitting rather than fixed at manufacture. One end cap carries a small slide switch. The individual settings are not stated by the manufacturer.
Can it be dimmed?
The manufacturer does not state a dimming figure or a compatible dimmer type, so we would wire it to an ordinary wall switch.
How much light is 6600 lumens?
Enough to light a single garage, a workshop or a store room from one fitting, at roughly 110 lumens per watt for the 60W it draws.
How long is the batten?
The manufacturer does not state a length for this model. Battens come in fixed lengths, so measure your run before planning a line of them.
Can it go on a wall as well as a ceiling?
Yes. A batten is a surface mounted fitting, so it screws straight to a ceiling or a wall with no recess or void needed.