Description
This grey lead coupler lets you walk two dogs together from one lead. It is a short Y of flat polyester webbing with a grey ring where the two arms meet and an iron swivel snap clip at the end of each arm. One dog clips to each side, and your own lead clips to the ring. The webbing is 2cm wide and the coupler is 30cm long, a short span that sits between two dogs walking side by side. The webbing is a soft mid grey and the clips have a plain silver tone.
It suits a home with two dogs that walk at a similar pace. It turns two leads into one, so you have a hand free for a ball, a coffee or the poo bags. Use it for everyday rounds of the block, trips to the park and longer country walks, with your usual lead clipped to the ring. Because it works with the lead you already own, there is nothing different to learn at your end. The coupler simply does the splitting between the two collars or harnesses. It is a handy piece to keep for the days when both dogs head out together.
The webbing is folded and stitched back on itself at the ring and at each clip. The clips are sprung snap hooks that open under the thumb and close on their own. Care is simple: wipe it clean only, and if the webbing ever becomes ragged or torn, dispose of it and replace it. Before each walk, check both clips and the ring, and make sure each clip has closed fully on the collar or harness. Hang it with your main lead on a hook by the door, and the pair are ready whenever you are.
Specification
| Length |
30cm |
| Width |
2cm |
| Material |
Polyester & iron |
| Care |
Wipe clean only, if your lead becomes ragged or torn dispose and replace |
Frequently Asked
How long is the coupler?
The coupler is 30cm long and made from polyester webbing 2cm wide. That is a short span between two dogs walking side by side.
How does the coupler attach to my dogs and my lead?
Clip one swivel snap clip to each dog's collar or harness, then clip your usual lead to the ring where the two arms meet.
Can I use it with the lead I already have?
Yes. Your own lead's clip goes on the ring at the join, and each dog clips to one of the two arms, so you walk both from one lead.
What is the coupler made from?
It is made from polyester webbing with iron fittings. The fittings are the ring at the join and the two swivel snap clips at the ends of the arms.
How do I clean and look after it?
Wipe it clean only. If the webbing becomes ragged or torn at any point, dispose of it and replace it, and check the clips before each walk.
What colour is it?
The webbing is a soft mid grey with a matching grey ring, and the two snap clips have a plain silver tone.