Description
Three rockers sit on a single flat plate, finished in a soft warm grey with chrome inserts framing each one. No screw heads show on the face, so the plate reads as a single clean piece of hardware rather than a fussy bit of trim. Each rocker is two way, which means it can act as the only switch for a light or as part of a pair controlling the same light from either end of a room. The rating is 10AX, standard for household lighting.
We stock this where a room needs several lighting circuits on a single plate: a kitchen with pendants over the island, downlights above the worktop and a strip under the shelves, or a sitting room where wall lights and a central fitting are switched from the door. It suits anyone replacing tired white plastic with something quieter, and the warm grey sits well in rooms painted in chalky neutrals where bright white would jump out. The rockers give a positive click, so there is no guessing whether a circuit is on. Keep it to dry indoor rooms on household lighting circuits.
The plate is moulded polycarbonate rather than metal, double insulated, and the surface is matt enough to hide fingerprints better than gloss white does. Cleaning takes little: a dry microfibre cloth over the plate now and then, and nothing wet or solvent based near the rockers. It carries a ten year warranty. We would use it alongside plain grey hardware elsewhere in the same room so the wall reads consistently, and against pale plaster or a chalky paint the grey recedes instead of drawing the eye. A small, sensible piece of kit that does its job and stays out of the way.
Specification
| Colour |
Warm Grey |
| Second Colour |
Chrome |
| Type of Finish |
Colour |
| Weight |
0.10KG |
| Length |
88mm |
| Width |
25mm |
| Height |
88mm |
| Back Box Depth |
25mm |
| Materials Used |
Polycarbonate, Metal |
| Max. Current Output |
10AX |
| Protection Class |
Class 2 - Double Insulated |
| Input Voltage |
220-250V~50/60Hz |
| Switch |
Yes - Rocker Switch |
| IP Rating |
IP20 |
| Warranty |
10yrs |
| UKCA/CE |
Yes |
| Additional Certification |
BS EN 60669 |
| Number of Gangs |
3 |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician. 25mm Box Depth Is Recommended. |
| Suitable For |
Indoor Use Only. Domestic lighting circuits. |
| Country of Origin |
China |
Frequently Asked
What size is the plate?
It is 88mm square, so it matches the footprint of a standard square plate switch.
Can it be used for two way switching?
Yes. Each of the three rockers is two way, so a light can be controlled from more than one switch position if the circuit is wired for it.
What is it made from?
A moulded polycarbonate plate in warm grey with chrome inserts around the rockers, double insulated to Class 2.
Is it suitable for a bathroom?
No. It is rated IP20, which means dry indoor rooms only, so keep it out of splash zones.
How should I clean it?
A dry soft cloth is all it needs. Avoid abrasive creams, solvents and sprays, which can dull the grey finish and mark the chrome.
What load is it rated for?
10AX, which covers normal domestic lighting circuits.