Description
Three rockers sit on a single square plate finished in a cool grey, with a chrome insert framing them. The screwless face carries no visible screw heads, so the plate reads as one clean shape on the wall rather than a piece of hardware. Each rocker is two way, which means it can control a light on its own or work in a pair with a second switch elsewhere in the same room. The plate itself is 88mm square.
This is the one we reach for where three lighting circuits land at a single point: a hallway with landing, porch and stair lights on one wall, a kitchen splitting pendants, downlights and under-cupboard strips, or a sitting room where wall lights and a central fitting want separate control. The grey is soft rather than cold, and we find it settles better than white against painted plaster in warm greys, clay tones and darker woodwork. It suits anyone tidying up a wall of mismatched plates without going to metal.
The plate and rockers are moulded in polycarbonate, a tough plastic that holds its colour and does not yellow the way cheaper mouldings can, and the switch is double insulated to Class 2. For cleaning, a dry cloth over the plate is usually enough, and a barely damp one will lift finger marks from around the rockers; keep solvents, cream cleaners and kitchen sprays away from the moulding, as they dull the surface and can attack the chrome insert. It is meant for indoor use on household lighting circuits. It carries a ten year warranty. If you are working along one wall, the same cool grey and chrome pairing looks best kept consistent from switch to switch rather than mixed with white.
Specification
| Colour |
Cool Grey |
| Second Colour |
Chrome |
| Type of Finish |
Colour |
| Weight |
0.10KG |
| Length |
88mm |
| Width |
25mm |
| Height |
88mm |
| Back Box Depth |
25mm |
| Materials Used |
Polycarbonate, Metal |
| Max. Current Output |
10AX |
| Protection Class |
Class 2 - Double Insulated |
| Input Voltage |
220-250V~50/60Hz |
| Switch |
Yes - Rocker Switch |
| IP Rating |
IP20 |
| Warranty |
10yrs |
| UKCA/CE |
Yes |
| Additional Certification |
BS EN 60669 |
| Number of Gangs |
3 |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician. 25mm Box Depth Is Recommended. |
| Suitable For |
Indoor Use Only. Domestic lighting circuits. |
| Country of Origin |
China |
Frequently Asked
What does two way mean on this switch?
Each of the three rockers is wired as two way, so it can either control a light by itself or be paired with a second switch controlling the same light from another position, such as at the top and bottom of a staircase.
What is the current rating?
The rockers are rated 10AX, which is the standard rating for domestic lighting circuits.
What are the plate dimensions?
The plate is 88mm by 88mm, with a depth of 25mm.
Is it a dimmer?
No. This is a rocker switch, so it switches each circuit fully on or off.
How should I clean it?
Wipe the plate with a dry cloth, or a slightly damp one for marks, then dry it off. Avoid solvents, cream cleaners and multi-surface sprays, which can dull the grey moulding and the chrome insert.
What is the finish made from?
The plate and rockers are polycarbonate, with a chrome insert set behind the rockers.