20W LED CCT Adjustable Slimline Batten 2200lm - White

A slimline LED batten built around a fixed 20W LED board, with a stated output of 2200 lumens and a switchable colour temperature rather than one fixed shade of white. The housing is white with a softly curved profile and a milky diffuser running the full length of the body, so the light leaves as a broad wash rather than a row of visible dots. A small slider sits in the moulded end cap. At 20W for 2200 lumens the fitting works out at roughly 110 lumens per watt.

Battens earn their keep where you want plain, even light over a working area: a garage, a workshop bench, a utility room, a loft, a cupboard under the stairs or a small commercial back office. The slim, low profile shape matters if the ceiling is already low or the fitting is going under a shelf, since a deep housing eats headroom a slim one does not. White on a white ceiling largely disappears when the light is off, which is why most people fit one and stop thinking about it.

Colour temperature is the decision to make here. CCT adjustable means the white is chosen rather than fixed, so a cooler, crisper light suits a bench or a laundry area while a warmer setting sits better over a desk or in a hallway. The manufacturer does not publish the exact kelvin values offered, and states nothing about dimming or an IP rating. Each listing is one fitting, and the minimum order is one, sold in multiples of one. The overall length is not stated, so measure the gap it has to fill before ordering.

What does CCT adjustable actually give me?

The fitting offers more than one shade of white instead of a single fixed one, so you can run it cool over a workbench and warmer over a desk. The manufacturer does not publish the exact kelvin values offered.

How bright is 2200 lumens in a garage or utility room?

That is a solid general light for a single garage, a utility room or a small store room. For a double garage or a long workshop, plan on two or more fittings spaced along the run.

Do I need to buy a tube or lamp as well?

No. The LEDs are built into the fitting and sit behind the diffuser, so there is nothing to slot in when you install it and no tube to source later.

Can it be dimmed?

The manufacturer does not state whether this fitting will dim. Where dimming matters to you, choose a fitting that prints a dimming specification, and pair it with a compatible LED dimmer.

What length is it?

An overall length is not stated by the manufacturer. If the batten has to fill a set gap between joists, under a shelf or inside a cupboard, confirm the figure with us before you order.