Description
The Zevi EL B 1GU10 is a single-lamp garden spike light that takes one GU10 PAR16 lamp drawing up to 10W, running directly from 220-240V AC mains. As a landscape spike light, it pushes a directional cone of light along a single axis, so the effect comes from the GU10 reflector lamp fitted rather than from the fixture itself, letting you set the tone and beam by your choice of bulb. The head sits on a slim spike body measuring 100 x 100 x 140 mm, keeping the visible footprint small among planting.
Staked into soil or a planted border, this fitting suits flower beds, shrub edges and the base of a feature plant or small tree, where the spike anchors it at the right height and angle to graze foliage or wash a low wall. Because the output depends on the lamp you pair with it, coverage is best judged by throw rather than area: a narrow GU10 will pick out a single specimen, while a wider beam spreads across a border. The IP54 rating makes it splash-resistant and suited to sheltered, covered positions such as a porch or carport border, so keep it clear of fully-exposed spots, direct water jets or any standing water.
Construction is aluminium alloy in a black finish, weighing 524 g, with the spike forming part of the body so it presses firmly into the ground without separate fixings. It is wired for mains operation, so no transformer is required for the 220-240V supply, and the GU10 lamp is replaceable from the head for straightforward upkeep. This spike sits within the wider Zevi range, which includes further ground and spike options for matching a garden scheme.
Specification
| Power |
max 10W |
| Voltage |
220-240 AC |
| IP rating |
IP54 |
| Mounting |
Ground Spike |
| Cap / base |
GU10 |
| Light source |
PAR16 |
| Dimensions |
100 × 100 × 140 mm |
| Weight |
524 g |
| Material |
Aluminium Alloy |
| Finish |
Black |
Downloads
Frequently Asked
Is it suitable for outdoor use?
It carries an IP54 rating, which makes it splash-resistant and suited to sheltered or covered outdoor positions such as a porch or carport border. It should not be placed where it is fully exposed to driving rain, direct water jets or standing water. For planted borders and beds it works well staked into the soil.
Can the beam angle be adjusted?
The head is set on the spike body, and the beam itself is determined by the GU10 PAR16 lamp you fit. Choosing a narrow reflector picks out a single plant, while a wider beam spreads across a border, so you can tailor the effect through your lamp selection.
Does it need a transformer or driver?
No. The fitting runs directly from a 220-240V AC mains supply, so no separate transformer or low-voltage driver is needed. It simply requires a suitable weatherproof mains connection in the garden.
Is a bulb included?
The fixture takes one GU10 PAR16 lamp rated up to 10W, which lets you pick the wattage, beam and colour tone to suit the planting. Check the listing details for whether a lamp is supplied, as the GU10 cap means replacements are easy to source and fit.