Zero II LED Flush Ceiling Light 50W 3000K 480mm - White

The Zero II is a 480mm diameter LED flush ceiling light built around a single 50W integrated LED panel behind an opal white acrylic diffuser, delivering 3700 lumens of 3000K warm white light. The fitting mounts directly to the ceiling with a 70mm total profile from ceiling surface to the outer face of the diffuser, making it suitable for rooms with ceiling heights of 2.3m or lower where a pendant would intrude into headroom.

Designed for living rooms, bedrooms, hallways and dining rooms needing general ambient lighting, the Zero II's 120-degree beam angle spreads light evenly across floor and walls without creating harsh shadows or bright spots. The 480mm diameter suits rooms between 12-18m² where a single central ceiling light provides the primary illumination. The white powder-coated metal backplate and trim ring sit flush against the ceiling, creating a clean circular aperture with no visible fixings once installed.

The opal acrylic diffuser softens the LED panel behind it, preventing glare when viewed from below and creating an even glow across the full 480mm circle. At 1.14kg the fitting is light enough to be supported by a standard ceiling rose and requires only mains wiring — no additional drivers or transformers. The non-dimmable LED panel is rated for 3000K warm white output, which pairs comfortably with neutral and warm-toned interiors without skewing colour perception.

The Zero II is part of Mantra's flush ceiling range from Spain, designed for residential installations where low-profile LED ceiling lighting is needed without moving to recessed downlights. The white finish integrates cleanly with white or off-white ceilings, and the slim 70mm depth allows the fitting to be used in loft conversions, converted basements, and period properties with lower ceiling heights where traditional pendants would hang too far into the room.

Is the Zero II suitable for low ceilings?

Yes. The 70mm profile from ceiling to outer face makes it well-suited to rooms with ceiling heights of 2.3m or lower, including loft conversions, basement conversions, and period properties where a pendant would hang too far into the room.

What size room does the 480mm diameter light effectively?

The 3700 lumen output and 120-degree beam angle suit rooms between 12-18m² when used as the primary ceiling light source. Larger rooms may benefit from two fittings or supplementary task lighting.

Is the LED panel dimmable?

No. The integrated LED panel is non-dimmable and operates at full 50W output when switched on.

How is the fitting installed?

The Zero II mounts directly to a standard UK ceiling rose using the backplate fixing points. Mains wiring connects to the terminal block inside the backplate, and the diffuser clips or screws onto the backplate once wiring is complete. No external driver or transformer is required.