Zero II LED Flush Ceiling Light 24W 3000K - White

The Zero II is a 330mm flush ceiling light with an integrated 24W LED delivering 1600 lumens of 3000K warm white light through an opal acrylic diffuser. The white-painted metal back plate sits 55mm from the ceiling surface, making this a low-profile fitting for rooms with standard or lower ceiling heights where a pendant would hang too low.

Designed for bedrooms, hallways, small living rooms and home offices, the Zero II provides general ambient lighting across a 10-12m² floor area. The 120-degree beam angle and opal diffuser distribute light evenly without creating harsh shadows or bright spots on the ceiling plane. The fitting connects to standard UK ceiling wiring and requires no additional driver or transformer beyond the integrated unit inside the back plate.

The circular opal diffuser hides the LED array completely when viewed from below, presenting as a single glowing disc rather than visible LEDs or spotting. The white finish on the metal back plate blends with white or light-coloured ceilings, keeping the fitting visually recessive. At 0.49kg the Zero II is light enough to be supported by a standard UK ceiling rose without additional reinforcement, and the shallow 55mm depth means it fits into most ceiling voids without clearance issues.

The 330mm diameter keeps the fitting compact enough for narrow hallways and smaller rooms where a larger disc would dominate the ceiling. Being non-replaceable, the integrated LED runs its full rated life without the need to source or fit new bulbs, and the 3-year warranty covers the driver and circuitry.

Is the Zero II dimmable?

No. The integrated LED is non-dimmable and should be wired to a standard on/off switch only. Connecting it to a dimmer switch may cause flickering or damage the internal driver.

What room size does it suit?

The 1600 lumen output suits rooms of approximately 10-12m² for general ambient lighting. This typically covers a small bedroom, hallway, or home office. Larger rooms may need multiple fittings or a higher-output model.

Can it be fitted to a low ceiling?

Yes. The 55mm projection from the ceiling makes the Zero II well-suited to rooms with ceiling heights of 2.3m or lower, where deeper fittings or pendants would feel oppressive or create headroom issues.

How is the diffuser cleaned?

The opal acrylic diffuser can be wiped with a dry or barely-damp microfibre cloth. Switch off the mains before cleaning. Avoid abrasive cleaners or solvents that may scratch or dull the acrylic surface.