Zephra 81cm Dimmable LED Flush Ceiling Light 42W 3000K - Brushed Brass

The Zephra is an 81cm diameter flush ceiling light with an integrated dimmable 42W LED module producing warm white light at 3000K. The fitting combines a brushed brass plated metal outer ring with an opal polycarbonate central diffuser that sits 35mm below the ceiling, making it suitable for rooms with ceiling heights below 2.4m where pendant lights would hang too low.

Designed for open-plan living rooms, bedrooms and dining areas in modern and contemporary homes, the Zephra provides general ambient lighting across a 15-20m² floor area. The dimmable LED allows brightness to be adjusted from full 42W output for evening gatherings down to a low glow for background light, provided the fitting is wired to a compatible trailing-edge or phase-cut dimmer switch. The opal diffuser eliminates visible LEDs and hot spots, distributing light evenly across the ceiling plane.

The brushed brass finish on the outer ring provides a warm metallic accent without the high reflectivity of polished brass, making it easier to integrate with both warm neutrals and cooler grey-toned interiors. The 81cm diameter gives presence in larger rooms without dominating the ceiling — it reads as a functional fitting rather than a decorative centrepiece. The polycarbonate diffuser is impact-resistant and lighter than glass, reducing the total weight on the ceiling fixing point.

At 35mm projection the fitting sits close to the ceiling, leaving headroom clearance in rooms with standard 2.4m ceiling heights or lower. The IP20 rating limits use to dry indoor spaces only — the Zephra is not suitable for bathrooms, outdoor use, or covered exterior porches. The LED module is integrated and non-replaceable, with a rated lifespan of 25,000 hours at typical domestic use patterns.

Is the Zephra suitable for low ceilings?

Yes. The 35mm projection makes it appropriate for rooms with ceiling heights below 2.4m where pendant lights would hang too low. The flush mounting leaves maximum headroom clearance.

What dimmer switch is needed?

The integrated LED requires a trailing-edge or phase-cut dimmer rated for LED loads. Standard resistive dimmers designed for incandescent bulbs will not work reliably and may cause flickering. Check the dimmer packaging for LED compatibility before purchase.

Can the LED module be replaced?

No. The LED is integrated into the fitting and cannot be user-replaced. The module is rated for 25,000 hours, which equates to approximately 10-15 years at typical domestic use (4-6 hours per day).

What room size does it suit?

The 42W output at 3000K provides general ambient lighting for rooms of 15-20m² floor area. Larger open-plan spaces may need a second light source or a combination with directional wall lights for adequate coverage.