Description
This is a compact white recessed downlight with a movement sensor built into the face, so the light comes on as someone walks beneath it and drops out again once the space has been still for a while. It draws 8W and puts out 720 lumens from an integrated LED, which is plenty for a circulation space or a small room. A switch on the body sets the white it gives: extra warm, warm or cool. It is not dimmable, and for a sensor fitting that is no loss, since it simply comes up at full output when called.
We use these where hands are usually full or the switch is never in the right place: hallways and landings, a utility room, a garage or store, the cupboard under the stairs. The housing is sealed against dust and splashes, so it copes with steam from a washing machine or a kettle as happily as it does with dry rooms. It suits anyone who wants light on arrival without thinking about it, and it is one we reach for in a run of ceilings where a switched plate would look fussy. The neat 85mm cut-out keeps it discreet in plaster.
The body and trim are finished in plain white, which sinks into a painted ceiling and stops the fitting reading as hardware. A driver comes with it, so there is nothing else to source. For cleaning, take the power off at the consumer unit and wipe the trim and lens with a barely damp cloth, keeping the sensor window clear so it reads the room properly; grease film in a kitchen will dull both the light and the response. It carries a three year warranty. The wider range runs to other outputs and a smaller cut-out if you are mixing sizes across a house.
Specification
| Colour |
White |
| Weight |
0.18KG |
| Diameter |
105mm |
| Height |
58mm |
| Cut Out |
85mm |
| Materials Used |
Aluminium |
| Energy Class |
F |
| Energy Class of Lamp |
Group A |
| Max Energy Class |
F |
| Min Energy Class |
F |
| Lamp |
1 x 8W integrated LED (no lamps to fit) |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Colour Temperature |
2700/3000/4000K Extra Warm/Warm/Cool White (±5%) |
| Number of Switching Cycles |
30000 |
| LED Power |
8W (±5%) |
| Lumens per Watt (lm/W) |
90lm/W (±5%) |
| System Flux |
720lm (±5%) |
| CRI |
>80 |
| Light Distribution |
Down |
| Driver Included |
Yes |
| Protection Class |
Class 2 - Double Insulated |
| Total Power Consumption |
8W (±5%) |
| Input Voltage |
220-240V~ 50/60Hz |
| Switch |
Yes - 3 CCT Switchable |
| Dimmable |
No |
| IP Rating |
IP54 |
| Average Life |
30000hrs |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| TUV |
Yes |
| EMV/EMC |
Yes |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
What size hole does it need?
The cut-out is 85mm. The visible trim measures 105mm across, so it covers the aperture with a modest margin.
How deep is the fitting?
The body stands 58mm tall, and the driver supplied with it needs room alongside in the ceiling void.
Can I choose the colour of the light?
Yes. A switch on the fitting selects 2700K extra warm white, 3000K warm white or 4000K cool white. Set all the downlights in a room to the same value so the ceiling looks consistent.
Can the LED be replaced?
No, the LED is integrated rather than a separate lamp. It is rated at an average life of 30,000 hours.
Will it work with a dimmer?
It is not dimmable, so it should be run from a plain switched circuit. The sensor handles the switching for you in normal use.
Is it suitable for a bathroom or utility?
It is IP54 rated, which covers dust and splashing, so it is fine in a utility room, a WC or a bathroom ceiling away from direct spray.