Description
A neat round downlight in white, sized for a 70mm cut-out and with a slim body. The LED is integral and the driver is supplied with it, so the fitting arrives complete. A small switch sets the light to extra warm, warm or cool white, so the shade of white is chosen at the time of wiring rather than at the point of order. Output is 630 lumens, drawn from 6.5W, cast straight down. It is one of the plainest downlights we sell, and that is the point: white on a white ceiling, doing its job without drawing attention.
It is sealed against dust and water, which is why we use these in bathrooms and shower rooms, and they are equally at home in a kitchen, a utility or a low hallway ceiling where a pendant would only be in the way. The cool white setting suits worktops and mirrors, while the extra warm setting is the friendlier choice over a bath. It is not dimmable, so plan it on a plain switch rather than a trailing edge dimmer, and if you want a run across a ceiling, keep them in groups so each area can be lit on its own.
The housing and bezel are finished in white, and the body is double insulated. Keep it clean by switching off at the wall, letting the fitting cool, then wiping the visible rim with a barely damp cloth; nothing abrasive, and no more than a light dust on the lens. It carries a three year warranty. We also stock a larger cut-out in the same range for wider spacing, and a version with a built-in PIR sensor.
Specification
| Colour |
White |
| Weight |
0.11KG |
| Diameter |
87mm |
| Height |
47mm |
| Cut Out |
70mm |
| Materials Used |
Aluminium |
| Energy Class |
F |
| Energy Class of Lamp |
Group A |
| Max Energy Class |
F |
| Min Energy Class |
F |
| Lamp |
1 x 6.5W integrated LED (no lamps to fit) |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Colour Temperature |
2700/3000/4000K Extra Warm/Warm/Cool White (±5%) |
| Number of Switching Cycles |
30000 |
| LED Power |
6.5W (±5%) |
| Lumens per Watt (lm/W) |
97lm/W (±5%) |
| System Flux |
630lm (±5%) |
| CRI |
>80 |
| Light Distribution |
Down |
| Driver Included |
Yes |
| Protection Class |
Class 2 - Double Insulated |
| Total Power Consumption |
6.5W (±5%) |
| Input Voltage |
220-240V~ 50/60Hz |
| Switch |
Yes - 3 CCT Switchable |
| Dimmable |
No |
| IP Rating |
IP65 |
| Average Life |
30000hrs |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| TUV |
Yes |
| EMV/EMC |
Yes |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
What size hole does it need?
It is made for a 70mm cut-out. The outer trim measures 87mm across, and the fitting stands 47mm tall.
How do I choose the colour of the light?
A switch on the fitting selects 2700K extra warm white, 3000K warm white or 4000K cool white, so one product covers all three.
Can it be dimmed?
No, this one is non-dimmable. It should be run from an ordinary on/off switch.
Is it suitable for a bathroom?
Yes. It is rated IP65, so it is sealed against dust and water jets, which suits bathrooms, shower rooms and utility areas.
Do I need to buy a driver or a lamp?
Neither. The driver is included and the LED is integrated, giving 6.5W and 630 lumens with an average life of 30,000 hours.