Description
This is a small white recessed downlight with a plain round bezel and an integrated LED behind it, so there is no lamp to buy and none to change later. It draws 10W and puts out around 1000 lumens, which goes a long way in a fitting of this size. A switch on the body sets the tone of the light to extra warm, warm or cool white, so the same downlight can suit a soft sitting room or a brighter kitchen. The driver is supplied with it, and it is not dimmable.
We use downlights like this where the ceiling needs to do its work quietly: kitchens, hallways, landings and utility rooms, and also bathrooms, en suites and shower rooms, since it is sealed against dust and water spray. The switchable colour helps if you are lighting several rooms at once and want a warmer tone in the bedrooms than over the worktop. It suits anyone lighting a whole ceiling rather than fitting one light, because every downlight in the run can be set to match.
The visible trim is finished in plain white, which settles into a painted ceiling rather than drawing the eye. Keep it clean with a dry cloth over the trim; in a shower room, where steam leaves marks, a barely damp cloth and then a dry one will clear them, with the power off first. It carries a three year warranty. Within the range we also stock a smaller version for tighter spacings and one with a PIR sensor built in, and we would happily run the plain downlights through a hallway and put a sensor version at the top of the stairs.
Specification
| Colour |
White |
| Weight |
0.19KG |
| Diameter |
105mm |
| Height |
58mm |
| Cut Out |
85mm |
| Materials Used |
Aluminium |
| Energy Class |
F |
| Energy Class of Lamp |
Group A |
| Max Energy Class |
F |
| Min Energy Class |
F |
| Lamp |
1 x 10W integrated LED (no lamps to fit) |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Colour Temperature |
2700/3000/4000K Extra Warm/Warm/Cool White (±5%) |
| Number of Switching Cycles |
30000 |
| LED Power |
10W (±5%) |
| Lumens per Watt (lm/W) |
100lm/W (±5%) |
| System Flux |
1000lm (±5%) |
| CRI |
>80 |
| Light Distribution |
Down |
| Driver Included |
Yes |
| Protection Class |
Class 2 - Double Insulated |
| Total Power Consumption |
10W (±5%) |
| Input Voltage |
220-240V~ 50/60Hz |
| Switch |
Yes - 3 CCT Switchable |
| Dimmable |
No |
| IP Rating |
IP65 |
| Average Life |
30000hrs |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| TUV |
Yes |
| EMV/EMC |
Yes |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
What size hole does it sit in?
It needs an 85mm cut-out. The outer trim measures 105mm across and the fitting is 58mm deep.
How do I choose the colour of the light?
A three-way switch on the fitting selects 2700K extra warm white, 3000K warm white or 4000K cool white. It is set once and then left alone.
Can it be dimmed?
No. It runs at full output only, so pair it with a standard on/off switch.
Is it suitable for a bathroom or shower area?
Yes. It is IP65 rated, which covers dust and water jets, so it is at home in bathrooms, en suites and shower rooms as well as dry rooms.
What happens when the LED reaches the end of its life?
There is no replaceable lamp; the LED is integrated and rated at 30,000 hours, and the whole fitting is changed at that point.
Does it come with everything needed to power it?
Yes, the driver is included, and the fitting is Class 2 double insulated.