XLED GU10 4.9W 53W-eq 100° 500lm LED Spotlight Bulb - Warm White

The XLED is a GU10 LED spotlight bulb that gives a directional 100 degree beam from a compact PAR16 body measuring just 50 mm across. It draws 4.9 W yet puts out around 500 lumens, so it stands in for an old 53 W spotlight while using a fraction of the power. The light is a 3000K warm white with a CRI of Ra 80 for natural-looking colour, and the GU10 twist-lock cap runs straight off the mains at 220 to 240V AC, with no separate transformer needed (unlike a low-voltage GU5.3/MR16 lamp). American buyers will know this as a screw-free bi-pin mains spot in the PAR16 reflector family.

The 100 degree beam spreads light fairly wide for a spot, so a row of these works well in kitchen ceiling spots, living room recessed fittings, hallway downlights and accent fixtures picking out shelving or artwork. The wide spread softens the pooling you get from a narrow spotlight, which makes it a sensible choice where you want even fill rather than a tight punch of light. As this is a dry indoor bulb on an IP20 basis, keep it to interior fittings; whether a given fixture is bathroom or outdoor safe depends on the fitting itself, not the bulb. Across a set of ceiling spots the warm tone holds a consistent, comfortable level for general and accent use.

The bulb has a tidy silver-finish PAR16 housing, weighs only 40 g and measures Ø50 by 53 mm, dropping into any standard GU10 holder. It is rated for 25,000 hours of use and reaches an efficiency of about 112 lm/W, so it earns its place in fittings that stay on for long stretches. Please note this XLED is non-dimmable, so pair it with a standard on/off switch rather than a dimmer circuit. Other wattages and beam options are available in the XLED GU10 range for matching a whole room of spots.

Product Specification Sheet

Range Datasheet

Which fitting does this bulb need?

It has a GU10 cap, the twist-lock bayonet-style base used in most modern mains spotlights and downlights. You simply push it in and give a quarter turn to lock it. Being GU10 it runs directly on mains voltage, so no transformer or driver is required.

What old bulb wattage does it replace?

The XLED draws just 4.9 W but produces around 500 lumens, which matches the output of a 53 W halogen spotlight. You get effectively the same brightness for a fraction of the energy. The bulb itself only ever uses 4.9 W.

Is this bulb dimmable?

No, this XLED is non-dimmable and should be used on a standard on/off switch. Fitting it to a dimmer circuit can cause flicker or buzzing and may shorten its life. If you need dimming, choose a bulb specifically rated as dimmable.

Is the light warm or cool, and how wide is the beam?

It gives a 3000K warm white, a soft and cosy tone that suits living spaces and kitchens. The beam angle is 100 degrees, which is wide for a spotlight and spreads light more evenly than a narrow beam. A CRI of Ra 80 keeps colours looking natural.