Description
The XARD is a recessed in-ground light that sits flush with the surface and throws its beam upward to graze a wall, tree or facade. It takes a single E27 A60 lamp up to 40W, running on 220-240V AC, so the output and tone follow the bulb chosen rather than a fixed integrated LED. The round body measures Ø150 × 183 mm. Buyers in the US will know this format as an in-grade or well light, the buried uplighter set into paving or decking rather than staked above it.
The XARD suits driveways, patios, paths and planted borders where a light needs to be walked over without protruding. Because it recesses INTO the ground and shines straight up, its job is accent uplighting, picking out a wall, column or specimen tree, so coverage is best judged by throw and the spread of the chosen lamp rather than a room area. Set it close to the surface it lights for a tight graze, or further back for a wider wash. Its IP67 rating means it copes with exposed positions, standing water and temporary submersion after heavy rain.
Built from aluminium alloy with a stainless steel finish, the XARD carries an IP67 weatherproof rating and an IK10 impact rating, so it withstands burial, foot traffic and knocks. The 183 mm depth allows it to be sunk fully into the ground or deck, with the lens flush to the surface. A bulb is not included, leaving the E27 choice to suit the scheme. At 1.12 kg the fitting is solid enough to seat firmly once installed.
Specification
| Power |
max 40W |
| Voltage |
220-240 AC |
| IP rating |
IP67 |
| IK rating |
IK10 |
| Mounting |
In The Ground |
| Cap / base |
E27 |
| Light source |
A60 |
| Shape |
Round |
| Dimensions |
Ø150 × 183 mm |
| Weight |
1.12 kg |
| Material |
Aluminium Alloy |
| Finish |
Stainless Steel |
Downloads
Frequently Asked
Can it be walked over once installed?
Yes. The XARD recesses flush into the ground or decking and carries an IK10 impact rating, so it withstands foot traffic. Its solid aluminium alloy body and stainless steel finish are built to take the load of being walked over.
Is it suitable for fully exposed outdoor and wet locations?
Yes. The IP67 rating makes it weatherproof and safe for buried, exposed positions, including standing water and temporary submersion after heavy rain. That covers driveways, paths and planted borders.
Does it take a standard bulb?
It uses a single E27 A60 lamp up to 40W on a 220-240V AC supply. The bulb is not included, so you can pick the wattage and colour temperature to suit the effect you want.
How do I keep it clean?
Wipe the lens with a damp cloth to clear grit, mud or debris that gathers at ground level. Keep the surrounding recess draining freely so water does not pool over the lens, and avoid abrasive pads on the stainless steel.