Varso Hi 36W Ø330 Round PIR Bulkhead Cool White - White

The Varso Hi is a round LED bulkhead that draws 36W and puts out 3600 lumens of cool white 4000K light through a wide 120 degree spread, with a built-in PIR sensor that switches it on as you approach. The body measures Ø327 by 52 mm, sitting close to the surface it mounts to. Buyers in the US market will recognise this format as an outdoor wall pack or sensor-equipped wall sconce, the kind of fitting that lights an entrance hands-free the moment movement is detected.

Its even, glare-controlled output suits sheltered entrances, porches, carports, stairwells and utility spaces where a light needs to come on automatically. The 120 degree beam washes a doorway or landing rather than spotlighting one point, so coverage is broad and shadow-free across the immediate area it serves. The PIR makes it a practical choice for places people pass through with full hands, and it works as well over a back door as it does in a communal corridor or garage approach. Wall or ceiling fixing both work, so it can sit above a door head or flat on a low soffit.

Built from white plastic with a round diffuser, the Varso Hi carries an IP54 rating that resists splashing and dust, which keeps it dependable in covered outdoor positions and damp indoor zones, though it should be kept clear of fully exposed, jetted or submerged locations. It runs from 220 to 240V AC mains, ceiling mounts via the supplied fixing, and is not dimmable. Rated for 20,000 hours with a Ra 80 colour rendering, it offers an efficient 100 lm/W. We stock the wider Varso range in plain and sensor versions for matching specification across a property.

Can the Varso Hi be used outdoors?

It carries an IP54 rating, so it resists splashing water and dust and suits sheltered outdoor spots such as a porch, carport or covered passage. Keep it out of fully exposed positions, direct water jets or anywhere it could be submerged. Indoors it also works well in damp utility areas and bathroom zones away from direct spray.

How does the built-in PIR sensor work?

The fitting has an integrated passive infrared sensor that detects movement and switches the light on automatically, then off again after a set period of no activity. This makes it useful over entrances, stairwells and garage approaches where hands-free operation is helpful. No separate sensor or wiring accessory is needed.

Is a bulb included or does it need replacing?

The Varso Hi uses integrated LEDs rather than a replaceable bulb, so there is nothing to fit or change. The light source is rated for around 20,000 hours of use. When that lifespan is reached the whole fitting is replaced.

How do I clean the diffuser?

Switch off and allow the fitting to cool, then wipe the round white diffuser with a soft, slightly damp cloth to clear dust and grime. Avoid abrasive pads or solvents, which can mark the plastic. A clean diffuser keeps the 3600 lumen output bright and even.