Description
The VARSO HI is a square LED bulkhead measuring 327 x 327 x 52 mm, drawing 36W and delivering 3600 lumens at a 4000K cool white tone. Across the US this style of fitting is more often searched as an outdoor wall pack or wall sconce, and the VARSO HI fills that role with a wide 120 degree spread that washes light evenly across the surface it sits on rather than throwing a narrow beam. The integrated LED gives a steady, even output with no replaceable lamp to manage, and the cool white colour suits practical and access areas where clear sight lines matter more than warmth.
This bulkhead works well over entrances, porches, carports, stairwells and communal corridors, where its low-profile square form keeps the fitting close to the wall or ceiling. With 3600 lumens behind a broad 120 degree beam, it covers a generous patch of wall or path and marks doorways and walkways clearly without harsh glare. The IP54 rating makes it splash-resistant and sheltered-rated, so it is at home in bathroom zones and covered outdoor positions such as a porch or carport. Keep it clear of fully exposed positions facing direct rain, water jets or any submersion, as it is built for sheltered use rather than open weather.
The body is moulded plastic in a white finish, square in shape and slim at just 52 mm deep, weighing 1.25 kg. It carries an IP54 rating and runs on 220 to 240V AC mains, with a rated lifespan of around 20,000 hours. The fitting is ceiling mounted and is not dimmable, so it is best paired with a standard switched circuit. Colour rendering is Ra 80, giving accurate enough tones for general access and utility lighting. The VARSO range includes further wattage and tone options if you need to match fittings across a scheme.
Specification
| Power |
36W |
| Voltage |
220-240 AC |
| Luminous flux |
3600 lm |
| Efficiency |
100 lm/W |
| Colour temperature |
4000K |
| Colour rendering (CRI) |
Ra 80 |
| Beam angle |
120° |
| IP rating |
IP54 |
| Dimmable |
No |
| Mounting |
Ceiling Mounted |
| Lifespan |
20,000 hours |
| Shape |
Square |
| Dimensions |
327 × 327 × 52 mm |
| Weight |
1.25 kg |
| Material |
Plastic |
| Finish |
White |
Downloads
Frequently Asked
Is this bulkhead suitable for outdoor use?
It carries an IP54 rating, which makes it splash-resistant and suited to sheltered outdoor spots such as a porch, carport or covered entrance, as well as bathroom zones indoors. It should not be fitted in fully exposed positions facing direct rain or water jets, so choose a covered location where it stays clear of the weather.
Does this fitting include the LED, or do I need a separate bulb?
The VARSO HI uses an integrated LED rated at 3600 lumens, so there is no separate bulb to buy or replace. The whole unit is designed to run for around 20,000 hours, after which the fitting is replaced as a single piece.
Where is this bulkhead typically used?
Its even 120 degree spread and 36W output suit entrances, stairwells, communal corridors, porches and carports. The slim square white body sits close to the wall or ceiling, making it a practical choice for access areas and circulation routes where clear, glare-free light is the priority.
How do I clean the bulkhead and keep it looking right?
Wipe the white plastic body and diffuser with a soft, slightly damp cloth and a mild detergent, then dry it off. Avoid abrasive pads or solvents, which can dull the finish, and make sure the fitting is switched off and cool before cleaning.