Description
Candle shape, clear finish, small screw cap: a lamp made to be seen rather than tucked out of sight. It draws 5.5W and returns 600 lumens of warm white, a 2700K tone that reads soft and slightly golden in a room rather than crisp. Because the body is clear, the light carries all round and the lamp itself stays part of the look, which is what you want on an open chandelier arm. It is dimmable, though it needs a dimmer rated for LED loads to behave properly.
We fit these into chandeliers, small wall lights and lantern-style hall fittings, anywhere the lamp is on show rather than hidden behind a shade. They suit bedside and table lamps with narrow shades too, where a wider envelope would crowd the fabric. If you are replacing older candle lamps gradually, the warm tone matches what most people are used to, so a part-changed fitting does not look patchy. And where the room runs off a dimmer circuit, this is the one we would reach for over a non-dimming lamp, which tends to flicker or refuse to start at low settings.
The cap is the smaller screw type, so check your fitting takes E14 rather than the larger size before ordering. Keep the clear surface clean and it looks after itself: switch off at the wall, let it lose its heat, then run a dry microfibre cloth over the body. No sprays, and nothing damp near the cap. Keep it to dry indoor rooms; a porch or a shower zone asks for something sealed. It carries a three year warranty. Clear candle lamps like this are worth buying as a set for a multi-arm fitting, so every arm reads the same.
Specification
| Colour |
Clear |
| Weight |
0.01KG |
| Diameter |
35mm |
| Height |
100mm |
| Materials Used |
Glass, Metal |
| Lamp Cap |
E14 |
| Colour Temperature |
2700K Warm White (±5%) |
| Number of Switching Cycles |
100000 |
| Conventional Lamp Equiv. |
48W (±5%) |
| Shape of Lamp |
Candle C35 |
| Type of LED |
Filament |
| Beam Angle |
360° |
| System Flux |
600lm (±5%) |
| CRI |
>80 |
| Ta |
-20° to +40°C |
| Total Power Consumption |
5.5W (±5%) |
| Input Voltage |
220-240V~50/60Hz |
| Dimmable |
Yes - Suitable Dimmer Required |
| Dimmer Included |
No |
| Average Life |
15000hrs |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| Country of Origin |
China |
Frequently Asked
How big is it?
It measures 35mm across the widest part of the candle and 100mm in overall length, so it fits comfortably in most chandelier arms and small shades.
What does it replace in old money?
At 600 lumens it stands in for a traditional 40W candle lamp, while drawing only 5.5W.
Will it work on my existing dimmer?
It dims, but the dimmer must be one rated for LED loads. Older resistive dimmers made for filament lamps can cause flicker or buzz, and no dimmer is supplied with the lamp.
How warm is the light?
2700K warm white, the soft yellow-white people associate with filament lighting. It is a flattering tone for dining rooms, bedrooms and hallways.
How long should it last?
It is rated at 15,000 hours of average life, which for a few hours a night runs to several years.
Can I use it outdoors?
No. Keep it to dry indoor spaces on a normal household supply; outdoor and bathroom positions need a lamp and fitting rated for damp.