Up/Down 2 LED Outdoor Wall Light - Stainless Steel Grey

The Knightsbridge Up/Down 2 is a 147mm IP44-rated outdoor wall light in 304 stainless steel with a grey brushed finish. Two integrated 3W LEDs sit inside the rectangular body, one casting a wide beam upward to wash over a wall face or soffit, the other projecting a narrower beam downward to light a path or doorstep. The built-in LED driver runs on 230V 50Hz mains and the 6000K daylight colour temperature delivers a crisp, cool-white output.

Designed for exterior mounting on house walls, garden walls, patio boundaries and porch surrounds, the IP44 rating protects against rain splash and dust ingress. The dual-beam configuration is useful for highlighting architectural detail above the fitting while providing functional ground-level light below. The compact 70mm width and 73mm projection suit narrow mounting surfaces next to doors, gate posts and alcoves where a larger wall light would protrude too far.

The 304 stainless steel body resists corrosion in coastal and wet environments better than mild steel or aluminium, and the brushed grey finish softens reflections under daylight. The clear diffuser at the base and top of the fitting ensures maximum output efficiency from the 30 total lumens. Total power draw is 6W, and the LED assembly is non-replaceable, with a rated life of 25,000 hours under typical outdoor use.

Product Specification Sheet

What does IP44 mean for outdoor use?

IP44 protects against solid objects larger than 1mm and water splash from any direction. This makes the fitting suitable for mounting under eaves, porch ceilings, or open wall positions exposed to rain, but not in locations subject to direct hosing or full immersion.

Is the LED replaceable?

No. The two 3W LEDs are integrated into the fitting and cannot be replaced. The LED assembly is rated for 25,000 hours of typical outdoor operation, which equates to approximately 10-12 years at 6 hours per night.

Can it be mounted on gate posts or fence panels?

Yes, provided the mounting surface is stable and the wiring can be routed safely. The 70mm width and 73mm projection suit narrow mounting locations such as brick gate posts, rendered fence piers, or timber cladding.

What colour temperature is 6000K?

6000K is a cool daylight white with a slight blue cast, often used for security and task lighting outdoors. It contrasts with the warmer 2700K-3000K tones common in indoor residential lighting.