TUNA Ø220 Round E27 Bulkhead - White

The Tuna is a round bulkhead light built around a standard E27 (Edison screw) lampholder, rated for a bulb of up to 25W on a 220-240V AC supply. It accepts GLS, CFL or LED lamps, so the brightness and colour temperature are set by the bulb you choose rather than fixed in the fitting. With its 225mm diameter and shallow 100mm depth, it sits close against the surface and casts a soft, even wash through its diffuser rather than a directional beam. For US buyers this is the classic round wall sconce format used by entrances and service areas the world over.

The fitting works on a wall or a ceiling, which makes it a flexible choice for sheltered outdoor positions and practical indoor spots alike. Typical homes for it include a porch, a covered entrance, a carport or a garage wall, as well as bathroom zones where its IP44 rating handles splashes and damp air. Because the light is diffused rather than focused, it gives general surround illumination over a doorway or along a short passage rather than throwing light across a large area, so think of it as marking and lighting an immediate spot rather than flooding a room.

The body and diffuser are moulded plastic in a white finish, with the round profile giving a clean, low-key look that suits most surroundings. The IP44 rating means it is splash-resistant and suited to covered or sheltered locations, but it is not designed for fully-exposed positions, direct water jets or submersion. Installation is by surface mounting straight to the wall or ceiling, and at 1.15kg it is light to handle on the bracket. The white plastic wipes clean easily to keep the diffuser bright. This bulkhead also sits within the wider Tuna range, which offers other sizes for matching fittings across a property.

Can the Tuna be used outdoors?

Yes, in sheltered positions. Its IP44 rating makes it splash-resistant, so it is well suited to a porch, covered entrance or carport. It should not be fitted in fully-exposed spots that face direct rain or water jets.

Does it come with a bulb included?

No, the bulb is supplied separately. The Tuna takes a standard E27 screw-fit lamp rated up to 25W, and you can use a GLS, CFL or LED bulb. Choosing an LED lamp gives the lowest running cost and longest life.

Where is this bulkhead typically used?

It is a common choice for entrances, hallways, garages, carports and bathroom zones where a robust, splash-resistant fitting is needed. The wall or ceiling mounting option means it can go above a door or overhead in a utility space. The diffused light gives even, glare-free illumination for these everyday areas.

How do I keep the diffuser clean?

Switch off the power and let any bulb cool, then wipe the white plastic diffuser with a soft, damp cloth. Avoid abrasive cleaners or solvents, which can dull the surface over time. A regular wipe keeps the light output looking bright and even.