Tulum CCT Dimmable LED Flush Ceiling Light With Remote Control - White

The Tulum is a 400mm flush ceiling light with a white polycarbonate body, a crystalline centre diffuser, and an integrated 24W LED panel that outputs 1,800 lumens. The LED is CCT-tuneable across 3000K-6000K via remote control, allowing the light colour to shift from warm white to cool daylight. The fitting is also dimmable via the same remote, giving control over both brightness and colour temperature without needing wall dimmer wiring.

Designed for low-ceiling rooms, bedrooms, hallways and compact living spaces where a semi-recessed or surface-mounted fitting is preferred over a drop pendant, the Tulum sits 50mm proud of the ceiling. The 120-degree beam angle spreads light evenly across a room of approximately 10-15 square metres, making it suitable as primary lighting in a bedroom or secondary ambient light in an open-plan living area. The remote control stores the last-used brightness and colour temperature settings, so the fitting resumes at the same level when switched back on at the wall.

The white finish is clean polycarbonate rather than painted metal, so there are no chips or wear marks over time from cleaning. The crystalline centre section is textured acrylic that refracts the LED light into a soft sparkle effect, adding visual interest to what would otherwise be a plain disc fitting. The combined white body and crystal centre suits modern neutral interiors, Scandi-style bedrooms, and bathrooms rated for zone-appropriate use (check IP rating in Specification if planning bathroom installation). At 1.85kg the fitting is light enough to mount onto standard plasterboard ceilings with the correct fixings.

What does CCT-tuneable mean?

CCT stands for Correlated Colour Temperature. The Tulum's integrated LED can shift between 3000K warm white and 6000K cool daylight via the remote control, allowing you to adjust the light tone to suit different times of day or tasks without changing the bulb.

Does the remote control need line-of-sight to the fitting?

Yes. The remote uses infrared, so it needs a clear line-of-sight to the fitting's receiver to adjust brightness or colour temperature. The remote is included with the fitting.

Can this be used on a wall dimmer switch?

The Tulum is designed for remote dimming only. Installing it on a wall dimmer can interfere with the internal driver and void the warranty. For best results, fit it to a standard on/off switch and use the remote for dimming and CCT adjustment.

What ceiling height does the 50mm profile suit?

The 50mm projection makes the Tulum suitable for standard 2.4m ceilings or lower. In rooms with higher ceilings the fitting will work but may appear visually smaller relative to the ceiling height.