Description
The Trellis is a 1.6m floor lamp built around a slender putty-patina stem that supports a hand-finished silver leaf orb at mid-height, topped with a cylindrical hand-painted parchment shade. The base and upper finial feature cast resin detailing modelled on twisted winter branches, finished in the same putty patina as the stem. A single E27 bulb inside the shade (sold separately) casts light downward and through the translucent parchment.
Designed for living rooms, bedrooms and reading corners where height and decorative presence matter more than wide light spread, the Trellis provides localised ambient light rather than task illumination. The 380mm shade diameter and 1626mm overall height suit rooms with standard 2.4m ceilings, positioning the shade at eye level when seated. The weighted base measures approximately 280mm diameter and provides stability on carpets and hard floors without requiring wall support.
The putty patina finish is a hand-applied painted treatment that varies slightly between individual lamps, giving each piece tonal variation in the grey-beige base colour. The silver leaf orb is applied by hand onto the resin sphere, so the metallic finish shows intentional irregularities and texture rather than a uniform metallic coating. The parchment shade is painted to match the putty tone on the exterior, with a natural parchment interior that warms the light output when the lamp is switched on.
The branch-inspired resin detailing on the base and finial references the sculptural forms of bare winter trees, with organic curves and asymmetry built into the cast moulds. This detailing is finished in the same putty patina as the rest of the metalwork, so the branches read as part of the continuous structure rather than applied ornament. The lamp accepts any standard E27 LED, halogen or filament bulb up to 60W, giving flexibility to choose light temperature and brightness to suit the room.
Specification
| Fitting Height |
1626mm |
| Width |
380mm |
| Projection/Depth |
279mm |
| Maximum Wattage |
60W |
| Socket |
E27 |
| Bulb(s) Included |
No |
| Guarantee |
2 Year Guarantee |
Frequently Asked
What bulb does it take?
The Trellis takes a standard E27 bulb up to 60W. Bulbs are sold separately. Most users pair this with a warm-white LED between 6-10W and 2700K-3000K to match the warm tones of the putty patina finish and parchment shade.
Does the putty patina finish vary between lamps?
Yes. The putty patina is hand-applied, so each lamp shows slight tonal variation in the grey-beige base colour and in the distribution of the finish across the metalwork and resin detailing. This is a feature of the hand-finishing process, not a defect.
Is the silver leaf applied to the entire orb?
The silver leaf is applied by hand to the resin orb at mid-height. The finish shows intentional texture and irregularities rather than a uniform metallic coating, giving the orb a hand-crafted appearance that contrasts with the matte putty patina of the surrounding metalwork.
What ceiling height is needed?
At 1626mm overall height, the Trellis suits rooms with standard 2.4m ceilings. The shade sits at approximately 1.5m from the floor when the lamp is positioned on a level surface, which is at or just above seated eye level in most living room and bedroom settings.