Description
The TOMIV2 is a GU10 LED spotlight bulb that pushes out a wide, directional pool of light. It draws just 1.2 watts while giving around 105 lumens, a crisp 6500K daylight tone, and a broad 100 degree beam, so coverage spreads softly rather than tightening to a narrow spot. The GU10 cap is the familiar twist-lock fitting that runs straight from mains voltage, with no separate transformer to wire in. For anyone shopping US-side, this is the bi-pin GU10 mains spotlight, distinct from the low-voltage MR16 two-pin lamp that does need a driver.
Light at this output works as accent and fill rather than as a main room source, so it suits a multi-head ceiling fitting, a track head, or a pelmet where several lamps share the load. The wide 100 degree spread is well matched to general task and display areas, washing a worktop, shelf or display niche rather than throwing a tight beam at a single point. Group a few across a kitchen or hallway ceiling to layer cool, even light. Because it is rated IP20 it is for dry indoor positions only, so keep it clear of bathrooms, porches and any damp setting.
The lamp follows the standard PAR16 spotlight form, measuring 50 mm across and 56 mm deep in a white body, and weighs only 18 grams. As a 1.2W LED it replaces an old 15W spotlight, and the figure refers only to the light it matches, not its own low draw. Rated for 25,000 hours with a Ra 80 colour rendering, it is a non-dimmable lamp, so it pairs with a standard switched circuit rather than a dimmer. Our wider GU10 bulb range covers other outputs and tones alongside this daylight version.
Specification
| Cap / fitting |
GU10 twist-lock |
| Bulb shape |
Spotlight |
| Power |
1.2 W |
| Replaces |
15 W incandescent |
| Luminous flux |
105 lm |
| Efficiency |
88 lm/W |
| Colour temperature |
6500K (Daylight) |
| Colour rendering (CRI) |
Ra 80 |
| Beam angle |
100° |
| Dimmable |
No |
| Rated life |
25000 hours |
Downloads
Product Specification Sheet
Range Datasheet
Frequently Asked
Which fitting does this bulb need?
It has a GU10 cap, the twist-lock fitting used on most mains spotlights and many track and ceiling heads. You push it in and give a quarter turn to lock. As a GU10 it runs directly from mains voltage and does not need a separate transformer, unlike a low-voltage MR16 lamp.
What old bulb wattage does it replace?
The TOMIV2 draws just 1.2 watts but replaces an older 15W spotlight, giving around 105 lumens. The 15W figure is only an equivalence to show the brightness you are matching, not the power this LED uses, which keeps running costs low.
Is this bulb dimmable?
No, this is a non-dimmable bulb. It is designed for a standard switched circuit, so it should not be fitted to a dimmer switch. Using it on a dimmer can cause flicker or shorten its life.
What does the 100 degree beam and 6500K tone suit?
The wide 100 degree beam spreads light broadly rather than tightly, so it works well for general accent and task areas such as worktops, shelves and hallways. The 6500K daylight tone is crisp and cool, useful where you want clear, bright light. It is rated IP20 for dry indoor use only.