Description
A compact rectangle for outside walls, finished in sand white with a clear diffuser across the face. At 68mm wide and 100mm tall it is one of the smaller exterior fittings we sell, and its shallow projection keeps it clear of a door swing or a narrow path. It takes a GU10 lamp of up to 50W, and we would fit an LED reflector lamp in it for a tidy, controlled pool of light.
It earns its keep by a back door, over a garage side entrance, along a narrow passage, or on a garden wall where you want light on a step rather than across the whole plot. It is sealed against dust and splashing water, so rain and hose spray are no trouble. There is no switch on the body, so it runs from an indoor switch, a timer or a sensor circuit, and if you want it to dim, pick a dimmable lamp to suit your dimmer. It suits flats, courtyards and small terraces where a lantern would look heavy.
The sand white finish is a fine, slightly textured matt that hides fingerprints and weathers well, and the clear front lets the lamp do the work without tinting the light. Keep it looking right by wiping the body and diffuser over now and then with a damp cloth and drying it off, more often near the coast where salt builds up on exposed walls. It carries a two year warranty. We stock the same rectangle in sand black, and there is a curved version of both, plus versions that take an extra lamp if you want light thrown up as well as down. Lamps are not included.
Specification
| Colour |
Sand White |
| Ceiling Mountable |
Yes |
| Weight |
0.39KG |
| Width |
68mm |
| Height |
100mm |
| Projection |
78mm |
| Materials Used |
Aluminium Die-Casting Body+Glass Diffuser |
| Energy Class |
A++ to D |
| Max Energy Class |
A++ |
| Min Energy Class |
D |
| Lamp |
1 x GU10 50W max (lamps not included) |
| Lamp Cap |
GU10 |
| Recommended Lamp |
LED (50mm Reflector) |
| Light Distribution |
Single Direction |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption (W) |
Dependent On Lamps Used (±5%) |
| Input Voltage (V) |
220-240V~50/60Hz |
| Switch |
Not Switched |
| Dimmable |
Yes - Dimmable Lamps Required |
| IP Rating |
IP54 |
| Warranty |
2yrs |
| UKCA/CE |
Yes |
| Shade Colour |
Clear |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Ensure light is not illuminated when cleaning. (2) Remove dirt with a damp cloth, do not use any detergents, do not clean with any pressurised water. |
| Country of Origin |
China |
Frequently Asked
What lamp does it take?
A single GU10 lamp rated up to 50W. A 50mm LED reflector is the one we would reach for.
Can I dim it?
Yes, provided you choose a dimmable GU10 lamp and pair it with a compatible dimmer on the circuit.
How far does it stand off the wall?
Projection is 78mm, with a face measuring 68mm wide by 100mm tall, so it stays tight to the wall in tight spots.
Is it suitable for an exposed wall?
It is rated IP54, which covers dust and splashing water from any direction, so open porches, side returns and garden walls are all fine.
Does it have its own switch?
No, it is unswitched and works from a switch, timer or sensor elsewhere on the circuit.
How do I clean it?
Turn the power off at the switch and let the lamp go cold, then wipe the body and clear front with a damp cloth and dry it. Avoid solvents and abrasive pads on the finish.