Description
The Testara-E is a slim, round LED flush ceiling light with a black rim framing a white opal diffuser. It measures 21.1cm across and just 3cm deep, so it sits close to the ceiling and keeps a low profile where headroom is tight. The light source is an integrated LED giving 1,500 lumens of warm white light at 3000K, the soft, homely tone most people want in a living space. Its IP20 rating means it is made for dry rooms indoors, which settles the question straight away: this is a light for hallways, landings and bedrooms, never a bathroom or a porch.
Being compact, it suits smaller rooms and lower ceilings: a hallway, a landing, a box room, a study or a walk-in wardrobe. 1,500 lumens is a generous output for a light this size, so a single fitting can serve as the main light in a smaller room. The black rim draws a crisp outline against a pale ceiling and sits well with monochrome schemes and matt black switches, while the white diffuser softens the light and keeps the LEDs out of sight. There is no switch or pull cord on the fitting; it is switched at the wall, so it works from the room's existing light switch.
The body and the diffuser are both plastic, and the whole light weighs 0.37KG, an easy load for a ceiling. The LED and the driver are replaceable by a specialist, so the whole fitting need not be replaced at the end of their working life. It carries an Energy Class D rating and runs on a 220-240V, 50/60Hz mains supply. As a wired-in mains light, it is installed by a qualified electrician, and the installation instructions are available as a download. Choose it where you want a tidy, shallow ceiling light that gives a warm, even glow without dropping into the room.
Specification
| Lumens |
1,500lm |
| Colour Temperature |
3000K |
| Body Material |
Plastic |
| Body Colour |
Black |
| Shade Material |
Plastic |
| Shade Colour |
White |
| IP Rating |
IP20 |
| Light Source |
LED, integrated |
| Energy Class |
D |
| Height |
3cm |
| Diameter |
21.1cm |
| Weight |
0.37KG |
| Replaceable Parts |
LED and driver replaceable by a specialist |
| Protection Class |
Class II |
| Voltage |
220-240V, 50/60Hz |
| Switch |
None (switched at the wall) |
Downloads
Installation Instructions (PDF)
Frequently Asked
Can I fit this ceiling light in a bathroom?
No. It is rated IP20, which means it is made for dry rooms indoors, so we would keep it out of bathrooms and away from any water.
How bright is the Testara-E?
It gives 1,500 lumens of warm white light at 3000K from an integrated LED, enough for one fitting to serve as the main light in a smaller room.
How big is the light?
It measures 21.1cm across and just 3cm deep, so it sits close to the ceiling and suits rooms where headroom is limited.
Does it need a bulb?
No. The light source is an integrated LED, so there is no bulb to buy or change, and the LED and the driver are replaceable by a specialist.
How is the light switched?
There is no switch or pull cord on the fitting itself. It is switched at the wall, so it works from the room's existing light switch.
What colour is the finish?
The body is black plastic and the diffuser is white plastic, giving a crisp black rim around a soft white glow whenever the light is lit.