Description
A square black bezel, 8.5cm across the face, keeps this one quiet in a ceiling while still giving a crisp square of light below. It takes a GU10 lamp, with an LED reflector the sensible choice for both running cost and warmth of light. It is not dimmable, so a standard switch is all it needs, and the body is sealed well enough to shrug off dust and splashing water.
We reach for these where light needs to spread evenly rather than pool in a single bright patch: over a kitchen worktop, down a hallway, across a utility room, or in an en suite where steam and the odd splash come with the territory. The square face works with tiled and panelled rooms, lining up with grout joints, cupboard runs and beam lines in a way a round one cannot. With 12W as the ceiling for the lamp, a good LED gives plenty of output for domestic rooms, and a set of them can be run together comfortably.
The fitting is double insulated, and the black finish runs across the whole visible face, so a row of them reads as a line of dark squares rather than bright rings. For cleaning, turn the light off at the switch, give the lamp time to cool, then take a dry cloth to the bezel; keep water and solvents away from it entirely. It carries a one year warranty. The same downlight comes with a white bezel if you want it to disappear into a painted ceiling, and there is a round face in black and in white too, which is handy when you want one shape in the kitchen and another in the hall. Lamps are not included.
Specification
| Colour |
Black |
| Ceiling Mountable |
Yes |
| Recessable |
Yes |
| Weight |
0.16KG |
| Length |
85mm |
| Width |
85mm |
| Height |
42mm |
| Cut Out |
68mm |
| Materials Used |
Aluminium |
| Energy Class |
A++ to E |
| Max Energy Class |
A++ |
| Min Energy Class |
E |
| Lamp |
1 x GU10 12W max (lamps not included) |
| Lamp Cap |
GU10 |
| Recommended Lamp |
LED (50mm Reflector) |
| Light Distribution |
Down |
| Protection Class |
Class 2 - Double Insulated |
| Total Power Consumption |
Dependent On Lamps Used (±5%) |
| Input Voltage |
100-240V~50/60Hz |
| Dimmable |
No |
| IP Rating |
IP54 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
| Unassembled |
No |
| Installation |
Requires Installation By Qualified Electrician |
| Sloped Ceiling Compatible |
No |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
What size hole does it need, and how much depth?
The cut-out is 68mm. The visible face measures 85mm by 85mm square, and the fitting stands 42mm deep behind it.
Which lamp should I buy for it?
A GU10 lamp with a 50mm reflector, up to 12W maximum. An LED is what we would choose. No lamp is supplied with the fitting.
Can I put it on a dimmer?
No. This version is non-dimmable, so it should be run from an ordinary on/off switch.
Is it suitable for a bathroom?
It is rated IP54, which means protection against dust and splashing water. Bathroom use also depends on which zone the light sits in, so have that confirmed by your electrician.
How do I keep the black bezel looking good?
Switch off, wait for the lamp to cool, then dust the bezel with a dry cloth. Avoid damp cloths, sprays and any solvent-based cleaner, which can dull the finish.
How heavy is it?
Very light at 0.16kg, so a set of them adds little to a ceiling.