Free Delivery on all orders over £99*

T8 LED Tube 22W 203W-eq G13 Linear Replacement - Cool White

£799
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The T8 LED Tube is a linear replacement for an old fluorescent tube, fitted with a G13 two-pin cap at each end. It draws 22 W yet pushes out 3520 lumens, so it stands in for an old 203 W tube while cutting running power sharply. The light reads as a 4000K cool white, a clean neutral tone for working areas, and a wide 220 degree beam angle spreads the output evenly down the length of the tube rather than throwing a narrow spot. In US terms this is the direct LED upgrade for a standard T8 tube light, sold as a one-for-one swap.

Made for indoor commercial and utility spaces, it suits workshops, garages, store rooms, stairwells, corridors and ceiling battens where a long even wash of light matters more than a focused beam. At 160 lm/W it is an efficient choice for areas that stay lit for long stretches. Coverage runs along the line of the fitting, so spacing tubes across a ceiling at regular intervals gives the steady, shadow-light commercial spaces need. Being IP20 rated, it is strictly for dry indoor use; keep it clear of bathrooms, damp utility corners and any outdoor or sheltered-outdoor position.

The tube measures 28 mm across and weighs 210 g, with a white body and a Ra 80 colour rendering that handles general task work well. It runs on 220-240 V AC and is rated for 30,000 hours of service. Before fitting, check whether the existing fitting needs the starter removed or the ballast bypassed for an LED tube, as the wiring varies by luminaire. This tube is non-dimmable, so pair it with a standard on or off switch rather than a dimmer. Cool white at 4000K, it sits in our wider range of T8 LED tubes available in alternative wattages and tones.

Specification
Cap / fitting G13 (T8 tube)
Bulb shape Tube
Power 22 W
Replaces 203 W incandescent
Luminous flux 3520 lm
Efficiency 160 lm/W
Colour temperature 4000K (Cool White)
Colour rendering (CRI) Ra 80
Dimmable No
Rated life 30000 hours
Downloads

Product Specification Sheet

Range Datasheet

Frequently Asked

What does this T8 LED tube replace?

It is a direct replacement for a standard T8 fluorescent tube with a G13 two-pin cap. Drawing just 22 W, it gives the light output equivalent to an old 203 W tube, so it is a one-for-one upgrade in most existing battens and fittings.

Do I need to remove the starter or bypass the ballast?

This depends on your existing fitting. Many older fluorescent luminaires need the starter removed or the ballast bypassed before an LED tube will work correctly. Check the wiring of your specific fitting, and have any rewiring carried out by a qualified electrician.

Can this tube be used outdoors or in a bathroom?

No. It carries an IP20 rating, which means it is for dry indoor use only. Keep it clear of bathrooms, damp areas and any outdoor or sheltered-outdoor location.

Is this tube dimmable?

No, this tube is non-dimmable. It should be wired to a standard on or off switch rather than a dimmer circuit. Its 4000K cool white output and Ra 80 colour rendering suit workshops, garages and corridors where steady, even light is needed.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Light source

Takes standard bulbs

Takes standard G13 bulbs, so you choose the brightness and colour to suit the room.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The T8 LED Tube is a linear replacement for an old fluorescent tube, fitted with a G13 two-pin cap at each end. It draws 22 W yet pushes out 3520 lumens, so it stands in for an old 203 W tube while cutting running power sharply. The light reads as a 4000K cool white, a clean neutral tone for working areas, and a wide 220 degree beam angle spreads the output evenly down the length of the tube rather than throwing a narrow spot. In US terms this is the direct LED upgrade for a standard T8 tube light, sold as a one-for-one swap.

    Made for indoor commercial and utility spaces, it suits workshops, garages, store rooms, stairwells, corridors and ceiling battens where a long even wash of light matters more than a focused beam. At 160 lm/W it is an efficient choice for areas that stay lit for long stretches. Coverage runs along the line of the fitting, so spacing tubes across a ceiling at regular intervals gives the steady, shadow-light commercial spaces need. Being IP20 rated, it is strictly for dry indoor use; keep it clear of bathrooms, damp utility corners and any outdoor or sheltered-outdoor position.

    The tube measures 28 mm across and weighs 210 g, with a white body and a Ra 80 colour rendering that handles general task work well. It runs on 220-240 V AC and is rated for 30,000 hours of service. Before fitting, check whether the existing fitting needs the starter removed or the ballast bypassed for an LED tube, as the wiring varies by luminaire. This tube is non-dimmable, so pair it with a standard on or off switch rather than a dimmer. Cool white at 4000K, it sits in our wider range of T8 LED tubes available in alternative wattages and tones.

    Specification
    Cap / fitting G13 (T8 tube)
    Bulb shape Tube
    Power 22 W
    Replaces 203 W incandescent
    Luminous flux 3520 lm
    Efficiency 160 lm/W
    Colour temperature 4000K (Cool White)
    Colour rendering (CRI) Ra 80
    Dimmable No
    Rated life 30000 hours
    Downloads

    Product Specification Sheet

    Range Datasheet

    Frequently Asked

    What does this T8 LED tube replace?

    It is a direct replacement for a standard T8 fluorescent tube with a G13 two-pin cap. Drawing just 22 W, it gives the light output equivalent to an old 203 W tube, so it is a one-for-one upgrade in most existing battens and fittings.

    Do I need to remove the starter or bypass the ballast?

    This depends on your existing fitting. Many older fluorescent luminaires need the starter removed or the ballast bypassed before an LED tube will work correctly. Check the wiring of your specific fitting, and have any rewiring carried out by a qualified electrician.

    Can this tube be used outdoors or in a bathroom?

    No. It carries an IP20 rating, which means it is for dry indoor use only. Keep it clear of bathrooms, damp areas and any outdoor or sheltered-outdoor location.

    Is this tube dimmable?

    No, this tube is non-dimmable. It should be wired to a standard on or off switch rather than a dimmer circuit. Its 4000K cool white output and Ra 80 colour rendering suit workshops, garages and corridors where steady, even light is needed.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.