Description
This is the small round driver that sits behind the Sunset recessed bases, turning the mains supply into the steady low current an LED module needs. It runs at a constant 150mA, so the light it feeds holds one output level from the moment it is switched on: on and off, with no dimming. The white body is a shallow disc, 92mm across, with the connections at the edge rather than the face. Rated at 6W, it is sized for one small fitting rather than a run of several.
We keep it in stock alongside the Sunset recessed bases so a downlight can be ordered as a working set rather than pieced together later. It suits dry indoor positions: hallway ceilings, kitchen and utility runs, alcoves and shelf lighting where the gear needs to stay out of sight. It is also the one we reach for when an existing driver has failed and the replacement needs to match on current and output. On/off switching means it works with ordinary wall switches, with no dimmer module or smart control gear to add. Because it is small and light, it is easy to work around when a lighting scheme is being planned.
The casing is white throughout, plain-faced and light enough to hold in one hand, which keeps it discreet against pale ceilings and cabinet interiors. Keep it clear of dust and clutter so warmth can escape, and if the casing ever needs attention, isolate the circuit and use a dry cloth rather than a damp one. It carries a three year warranty. The wider Sunset range runs to recessed bases in several sizes and in black, gold and white, and this is the part that quietly feeds them. Sold as the driver alone, without a light module.
Specification
| Colour |
White |
| Weight |
0.06KG |
| Diameter |
92mm |
| Height |
25mm |
| Materials Used |
Aluminium |
| LED Power |
6W (±5%) |
| Type of Driver |
Eaglerise |
| Constant Current Output |
150mA |
| Min/Max. Voltage Output |
30-42V |
| Load Range |
6W |
| Total Power Consumption |
6W (±5%) |
| IP Rating |
IP20 |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Country of Origin |
China |
Frequently Asked
What output does this driver give?
It is a constant current driver delivering 150mA at 6W, so the module it feeds runs at one fixed level.
Can I use it with a dimmer?
No. It is an on/off driver, so it should be switched by a standard switch rather than a dimmer of any type.
How big is it?
It is a round disc 92mm in diameter and 25mm deep, weighing 60g.
Is it suitable for a bathroom or outdoors?
It is rated for dry indoor conditions only, so keep it away from damp, splashes and unheated outbuildings.
Does it come with a light?
No, this is the driver on its own. The Sunset recessed bases and the LED module are separate items.
How do I clean it?
Isolate the circuit first, then wipe the casing with a dry cloth. Avoid water, sprays and solvents.