Description
This is a compact LED driver in a plain white casing, 33mm across and slim enough to tuck away out of sight. It gives a controlled current supply to small LED fittings and accepts phase cut dimming, so an ordinary mains dimmer can bring the light down without any extra control gear in the circuit. Rated at 10W, it is sized for a single small fitting or a short run of low output ones rather than a whole ceiling of them.
We reach for it when a customer is putting together a scheme of small recessed lights in a hall, a dressing area or above a worktop, and wants the whole lot on one familiar dimmer plate. It also earns its place as a like for like replacement when an older driver of similar rating gives up and the fittings themselves are still sound. It is a dry indoor component, happiest in a heated room, and not one for a bathroom zone, an outbuilding or anywhere it might meet damp.
The casing is a moulded white shell, unfussy and easy to keep clean: with the power off, a dry cloth over the body is all it ever asks, and it is worth clearing any dust or debris away from it now and again so nothing sits against it. There is no lamp holder here, as the driver simply feeds the fitting it is paired with. It carries a three year warranty. The wider range runs to recessed bases in five sizes, offered in black, gold and white, and this driver is the piece we pair with the smaller of them when a dimmed output is wanted. Choose the driver to suit the load rather than the room, and the dimming will behave itself.
Specification
| Colour |
White |
| Weight |
0.07KG |
| Length |
115mm |
| Width |
33mm |
| Height |
22mm |
| Materials Used |
Iron, Plastic |
| LED Power |
10W (±5%) |
| Type of Driver |
Triac Dimmable |
| Constant Current Output |
250mA |
| Min/Max. Voltage Output |
25-40V |
| Load Range |
10W |
| Total Power Consumption |
10W (±5%) |
| IP Rating |
IP20 |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Country of Origin |
China |
Frequently Asked
What size is this driver?
It measures 115mm long, 33mm wide and 22mm high, and weighs 0.07kg, so it takes up very little space.
Can I dim the lights running from it?
Yes. It is a phase cut dimmable driver, so it works with a standard mains dimmer rather than needing a separate dimming protocol.
How much can it run?
It is rated at 10W, which suits a single small LED fitting or a short group of low output ones. For a larger load, use a driver with a higher rating.
Is it suitable for a bathroom?
No. It is rated IP20 and intended for dry, heated indoor spaces only.
Does it come with a warranty?
It carries a three year warranty from the manufacturer.
How do I clean it?
Switch the circuit off, then wipe the white casing with a dry cloth. Avoid sprays and solvents, and keep dust from building up around it.