Description
The Stratiform is a 20-light tiered chandelier built from cascading brass chain veils suspended on a polished gold metal structure. Three overlapping chain layers form a soft spiral silhouette, each rim trimmed with a polished gold band. Twenty replaceable 2.1W LED modules at 3000K sit within the structure, casting warm light through the chain mesh and onto the gold-banded edges.
At 136cm in diameter and 103cm in height, the Stratiform is sized for double-height foyers, hotel lobbies, stairwell voids and large dining rooms with ceiling heights of 4m or more. The 150cm cable allows the fitting to be hung at varying drops on installation. At 36kg, it requires a structural ceiling fixing rated for the load — a competent electrician should confirm the fixing point before installation.
The chain veils are made from fine brass links woven into a dense mesh, which catches light along its length and creates the woven, fabric-like texture visible across each tier. The polished gold rim banding sharpens the silhouette against the softer chain, and a small finial of chain falls below the lowest tier to anchor the composition. The fitting pairs with cream, walnut, travertine and warm neutral interiors where the gold tone reads as a colour rather than a metallic accent.
Specification
| Height |
103cm |
| Diameter |
136cm |
| Material |
Brass Chains, Metal Structure |
| Bulb Type |
20 x Built in Replaceable LED Module 2,1W 3000K |
| Weight |
36kg |
| Voltage |
230-240V |
| Cable Length (cm) |
150 |
| Warranty |
2 Year |
Frequently Asked
What ceiling height does the Stratiform need?
With a height of 103cm and a diameter of 136cm, the chandelier is best suited to rooms with ceilings of 4m or more, such as double-height foyers, stairwells and large dining rooms. The 150cm cable allows the drop to be adjusted at installation to suit the specific void.
Are the LED modules replaceable?
Yes. The fitting uses 20 built-in replaceable LED modules, each rated at 2.1W with a 3000K warm-white colour temperature. Modules can be swapped individually rather than replacing the whole fitting at end of life.
How is the chandelier installed?
The fitting weighs 36kg and must be hung from a structural ceiling fixing rated for the load. Installation should be carried out by a qualified electrician, who will confirm the fixing point, route the 150cm cable into the ceiling rose and set the final hanging height before tensioning.
How are the brass chains cleaned?
Dust the chain veils periodically with a soft, dry brush or microfibre cloth, working with the direction of the chains to avoid catching the links. Avoid liquid cleaners and polishes on the brass chain mesh, as these can wick into the weave and dull the finish.